Product Description
Machining Capability
Our Gear, Pinion Shaft, Ring Gear Capabilities:
Capabilities of Gears/ Splines | ||||||
Item | Internal Gears and Internal Splines | External Gears and External Splines | ||||
Milled | Shaped | Ground | Hobbed | Milled | Ground | |
Max O.D. | 2500 mm | |||||
Min I.D.(mm) | 30 | 320 | 20 | |||
Max Face Width(mm) | 500 | 1480 | ||||
Max DP | 1 | 0.5 | 1 | 0.5 | ||
Max Module(mm) | 26 | 45 | 26 | 45 | ||
DIN Class Level | DIN Class 8 | DIN Class 4 | DIN Class 8 | DIN Class 4 | ||
Tooth Finish | Ra 3.2 | Ra 0.6 | Ra 3.2 | Ra 0.6 | ||
Max Helix Angle | ±22.5° | ±45° |
Our Main Products
1. Spur Gear
2. Planetary Gear
3. Metal Gears
4. Gear Wheel
5. Ring Gear
6. Gear Shaft
7. Helical Gear
8. Pinion Gear
9. Spline Shaft
Company Profile
1. 21 years experience in high quality gear, gear shaft's production, sales and R&D.
2. Our Gear, Gear Shaft are certificated by ISO9001: 2008 and ISO14001: 2004.
3. CZPT has more than 50 patents in high quality Gear, Gear Shaft manufacturing.
4. CZPT products are exported to America, Europe.
5. Experience in cooperate with many Fortune 500 Companies
Our Advantages
1) In-house capability: OEM service as per customers' requests, with in-house tooling design & fabricating
2) Professional engineering capability: On product design, optimization and performance analysis
3) Manufacturing capability range: DIN 3960 class 8 to 4, ISO 1328 class 8 to 4, AGMA 2000 class 10-15, JIS 1702-1703 class 0 to 2, etc.
4) Packing: Tailor-made packaging method according to customer's requirement
5) Just-in-time delivery capability
FAQ
1. Q: Can you make as per custom drawing?
A: Yes, we can do that.
2. Q: If I don't have drawing, what can you do for me?
A: If you don't have drawing, but have the sample part, you may send us. We will check if we can make it or not.
3. Q: How do you make sure the quality of your products?
A: We will do a series of inspections, such as:
A. Raw material inspection (includes chemical and physical mechanical characters inspection),
B. Machining process dimensional inspection (includes: 1st pc inspection, self inspection, final inspection),
C. Heat treatment result inspection,
D. Gear tooth inspection (to know the achieved gear quality level),
E. Magnetic particle inspection (to know if there's any cracks in the gear).
We will provide you the reports 1 set for each batch/ shipment.
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
---|
Material: | 17CrNiMo6 |
---|---|
Load: | Drive Shaft |
Stiffness & Flexibility: | Stiffness / Rigid Axle |
Customization: |
Available
| Customized Request |
---|
hollow drive shaft
Hollow driveshafts have many benefits. They are light and reduce the overall weight of the vehicle. The largest manufacturer of these components in the world is CZPT. They also offer lightweight solutions for various applications, such as high-performance axles. CZPT driveshafts are manufactured using state-of-the-art technology. They offer excellent quality at competitive prices.
The inner diameter of the hollow shaft reduces the magnitude of the internal forces, thereby reducing the amount of torque transmitted. Unlike solid shafts, hollow shafts are getting stronger. The material inside the hollow shaft is slightly lighter, which further reduces its weight and overall torque. However, this also increases its drag at high speeds. This means that in many applications hollow driveshafts are not as efficient as solid driveshafts.
A conventional hollow drive shaft consists of a first rod 14 and a second rod 14 on both sides. The first rod is connected with the second rod, and the second rod extends in the rotation direction. The two rods are then friction welded to the central area of the hollow shaft. The frictional heat generated during the relative rotation helps to connect the two parts. Hollow drive shafts can be used in internal combustion engines and environmentally-friendly vehicles.
The main advantage of a hollow driveshaft is weight reduction. The splines of the hollow drive shaft can be designed to be smaller than the outside diameter of the hollow shaft, which can significantly reduce weight. Hollow shafts are also less likely to jam compared to solid shafts. Hollow driveshafts are expected to eventually occupy the world market for automotive driveshafts. Its advantages include fuel efficiency and greater flexibility compared to solid prop shafts.
Cardan shaft
Cardan shafts are a popular choice in industrial machinery. They are used to transmit power from one machine to another and are available in a variety of sizes and shapes. They are available in a variety of materials, including steel, copper, and aluminum. If you plan to install one of these shafts, it is important to know the different types of Cardan shafts available. To find the best option, browse the catalog.
Telescopic or "Cardan" prop shafts, also known as U-joints, are ideal for efficient torque transfer between the drive and output system. They are efficient, lightweight, and energy-efficient. They employ advanced methods, including finite element modeling (FEM), to ensure maximum performance, weight, and efficiency. Additionally, the Cardan shaft has an adjustable length for easy repositioning.
Another popular choice for driveshafts is the Cardan shaft, also known as a driveshaft. The purpose of the driveshaft is to transfer torque from the engine to the wheels. They are typically used in high-performance car engines. Some types are made of brass, iron, or steel and have unique surface designs. Cardan shafts are available in inclined and parallel configurations.
Single Cardan shafts are a common replacement for standard Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to choose the 1310 series. This type is great for lifted jeeps and requires a CV-compatible transfer case. Some even require axle spacers. The dual Cardan shafts are also designed for lifts, which means it's a good choice for raising and lowering jeeps.
universal joint
Cardan joints are a good choice for drive shafts when operating at a constant speed. Their design allows a constant angular velocity ratio between the input and output shafts. Depending on the application, the recommended speed limit may vary depending on the operating angle, transmission power, and application. These recommendations must be based on pressure. The maximum permissible speed of the drive shaft is determined by determining the angular acceleration.
Because gimbal joints don't require grease, they can last a long time but eventually fail. If they are poorly lubricated or dry, they can cause metal-to-metal contact. The same is true for U-joints that do not have oil filling capability. While they have a long lifespan, it can be difficult to spot warning signs that could indicate impending joint failure. To avoid this, check the drive shaft regularly.
U-joints should not exceed seventy percent of their lateral critical velocity. However, if this speed is exceeded, the part will experience unacceptable vibration, reducing its useful life. To determine the best U-joint for your application, please contact your universal joint supplier. Typically, lower speeds do not require balancing. In these cases, you should consider using a larger pitch diameter to reduce axial force.
To minimize the angular velocity and torque of the output shaft, the two joints must be in phase. Therefore, the output shaft angular displacement does not completely follow the input shaft. Instead, it will lead or lag. Figure 3 illustrates the angular velocity variation and peak displacement lead of the gimbal. The ratios are shown below. The correct torque for this application is 1360 in-Ibs.
Refurbished drive shaft
Refurbished driveshafts are a good choice for a number of reasons. They are cheaper than brand new alternatives and generally just as reliable. Driveshafts are essential to the function of any car, truck, or bus. These parts are made of hollow metal tubes. While this helps reduce weight and expense, it is vulnerable to external influences. If this happens, it may crack or bend. If the shaft suffers this type of damage, it can cause serious damage to the transmission.
A car's driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and related components. Their factory has the capability to refurbish and repair almost any make or model of driveshafts. Refurbished driveshafts are available for every make and model of vehicle. They can be found on the market for a variety of vehicles, including passenger cars, trucks, vans, and SUVs.
Unusual noises indicate that your driveshaft needs to be replaced. Worn U-joints and bushings can cause excessive vibration. These components cause wear on other parts of the drivetrain. If you notice any of these symptoms, please take your vehicle to the AAMCO Bay Area Center for a thorough inspection. If you suspect damage to the driveshaft, don't wait another minute - it can be very dangerous.
The cost of replacing the drive shaft
The cost of replacing a driveshaft varies, but on average, this repair costs between $200 and $1,500. While this price may vary by vehicle, the cost of parts and labor is generally equal. If you do the repair yourself, you should know how much the parts and labor will cost before you start work. Some parts can be more expensive than others, so it's a good idea to compare the cost of several locations before deciding where to go.
If you notice any of these symptoms, you should seek a repair shop immediately. If you are still not sure if the driveshaft is damaged, do not drive the car any distance until it is repaired. Symptoms to look for include lack of power, difficulty moving the car, squeaking, clanking, or vibrating when the vehicle is moving.
Parts used in drive shafts include center support bearings, slip joints, and U-joints. The price of the driveshaft varies by vehicle and may vary by model of the same year. Also, different types of driveshafts require different repair methods and are much more expensive. Overall, though, a driveshaft replacement costs between $300 and $1,300. The process may take about an hour, depending on the vehicle model.
Several factors can lead to the need to replace the drive shaft, including bearing corrosion, damaged seals, or other components. In some cases, the U-joint indicates that the drive shaft needs to be replaced. Even if the bearings and u-joints are in good condition, they will eventually break and require the replacement of the drive shaft. However, these parts are not cheap, and if a damaged driveshaft is a symptom of a bigger problem, you should take the time to replace the shaft.
editor by CX 2023-05-18
China Planetary Gearbox Sun Gear Spline Shaft front drive shaft
Product Description
Our Characteristic
one) In-house ability: OEM support as per customers' requests, with in-home tooling layout & fabricating
2) Expert engineering ability: On product design and style, optimization and functionality evaluation
3) Manufacturing ability assortment: DIN 3960 class 8 to 4, ISO 1328 course 8 to 4, AGMA 2000 course ten-15, JIS 1702-1703 class to 2, and many others.
four) Packing: Tailor-made packaging method in accordance to customer's requirement
5) Just-in-time shipping and delivery capability
Major Aggressive Benefits
one. Expert bull helical gear company
2. Expertise in Cooperate with Fortune 500 Companies
three. Expert Engineering Functionality
four. Secure Top quality
5. Sensible Cost
6. Modest Orders Approved
seven. Steady Advancements
eight. Large Solution Overall performance
9. Prompt Supply
10. Specialist Support
Our Primary Product
one. Spur Gear
two. Planetary Equipment
3. Metal Gears
four. Gear Wheel
five. Ring Gear
six. Equipment Shaft
7. Helical Gear
8. Pinion Equipment
9. Spline Shaft
Organization Profile
one.21 many years knowledge in higher high quality Equipment Shaft's production, product sales and R&D
two. Our item, the Gear Shaft is certificated by ISO9001: 2008 and ISO14001: 2004.
three. CZPT has a lot more than fifty patents in higher good quality Equipment Shaft producing and R&D fieles.
four. CZPT merchandise are exported to America, Europe.
Q&A:
Service and quality details:
one. Q: Can you make as per personalized drawing?
A: Sure, we can do that.
two. Q: If I do not have drawing, what can you do for me?
A: If you will not have drawing, but have the sample element, you may send out us. We will check out if we can make it or not.
three. Q: How do you make sure the top quality of your merchandise?
A: We will do a series of inspections, this sort of as:
A. Raw materials inspection (consists of chemical and actual physical mechanical people inspection),
B. Machining procedure dimensional inspection (includes: 1st personal computer inspection, self inspection, ultimate inspection),
C. Heat therapy end result inspection,
D. Gear tooth inspection (to know the accomplished equipment high quality level),
E. Magnetic particle inspection (to know if there is certainly any cracks in the gear).
We will supply you the stories 1 set for each and every batch/ cargo.
sun gear spline shaft | |
Tooth trace | Involute |
materials | 18Cr2Ni4WA |
Procedure | Forging, quenching and tempering, enamel grinding, spline hobbing |
Strain angle | Spline 30°, Equipment teeth 20° |
High quality stage | Equipment part AGMA quality ten Spline component GB3478 grade 6 |
Kind | Mn=7, Z=sixteen, a=20°, Mn=5, Z=eighteen, a=30° Mn=6, Z=19, a=20°, Mn=2.5, Z=34, a=30° |
Model | NYY |
Max. N.M | 2700/2800 |
Overall size mm | 295 / three hundred |
Capabilities of Gears/ Splines | ||||||
Item | Internal Gears and Interior Splines | External Gears and Exterior Splines | ||||
Milled | Shaped | Floor | Hobbed | Milled | Floor | |
Max O.D. | 2500 mm | |||||
Min I.D.(mm) | 30 | 320 | 20 | |||
Max Face Width(mm) | 500 | 1480 | ||||
Max DP | 1 | .5 | 1 | .5 | ||
Max Module(mm) | 26 | 45 | 26 | forty five | ||
AGMA/ DIN Level | DIN Course 8 | DIN Class four | DIN Class 8 | DIN Course four | ||
Tooth Complete | Ra 3.two | Ra .6 | Ra 3.2 | Ra .six | ||
Max Helix Angle | ±22.5° | ±45° |
Custom made Produced Components Examples:
Material: | Alloy Steel |
---|---|
Load: | Drive Shaft |
Stiffness & Flexibility: | Stiffness / Rigid Axle |
Axis Shape: | Straight Shaft |
Shaft Shape: | Stepped Shaft |
Appearance Shape: | Round |
Customization: |
Available
| Customized Request |
---|
What is a driveshaft and how much does it cost to replace one?
Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it's important to know if you want to fix your car. In this article, we'll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
Repair damaged driveshafts
A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don't fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don't have a mechanical background, it's better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it's time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
Learn about U-joints
While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can't drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.
Symptoms of Driveshaft Failure
One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it's time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
The cost of replacing the drive shaft
Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you're replacing the axles of an all-wheel-drive car, you'll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it's best to hire a mechanic with experience in the field. You'll be spending hundreds of dollars a month, but you'll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you've noticed the symptoms above, it's worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.
editor by CX 2023-04-10
China Worm Gear Drive Wheel Good Price Ground Shaft Helical Micro for Gearbox Speed Reducer Outdoor Ride Car Spare Part Worm Gear drive shaft shop
Merchandise Description
Our Rewards
Our advantange, Reduced MOQ as significantly less as 1 piece, one hundred% inspection, Quick Direct time.
Our support
We manufacture a variety of shafts made according to drawing, like roud shaft, sq. shaft, hollow shaft, screw shaft, spline shaft, gear shaft, etc.
Materials | Alloy, stainless steel, Carbon steel, etc. |
Mahines | NC lathe, Milling macine, Ginder, CNC, Equipment milling device. |
Third get together inspection | Available, SGS, CNAS, BV, and so forth. |
UT common | ASTM A388, AS1065, GB/T6402, and many others. |
Packaging | Seaworthy packing |
Drawing format | PDF, DWG, DXF, STP, IGS, and so forth. |
Application | Industry usage, Equipment utilization. |
MOQ | 1 piece |
Drawing format | PDF, DWG, DXF, STP, IGS, and so on. |
Quotation time | 1 times. |
Lead time | Generaly 30-forty days for mass manufacturing. |
Our Merchandise
Throughout the go ten years, we have supplied hundreds of buyers with excellent precision machining jobs:
Workshop & machining approach
We manufacture various shafts produced in accordance to drawing, such as roud shaft, square shaft, hollow shaft, screw shaft, spline shaft, equipment shaft, etc.
FAQ
Q: Are you treading organization or manufacturer?
A: We are manufacturer.
Q: How about your MOQ?
A: We give both prototype and mass production, Our MOQ is 1 piece.
Q:How lengthy can I get a quote following RFQ?
A:we normally estimate you inside 24 hrs. A lot more element information provided will be valuable to help save your time.
one) in depth engineering drawing with tolerance and other necessity.
2) the amount you desire.
Q:How is your top quality guarantee?
A:we do one hundred% inspection before shipping, we are hunting for prolonged term company relationship.
Q:Can I sign NDA with you?
A:Certain, we will keep your drawing and information confidential.
US $5-40 / Piece | |
1 Piece (Min. Order) |
###
Casting Method: | Thermal Gravity Casting |
---|---|
Process: | CNC |
Molding Technics: | Gravity Casting |
Application: | Machinery Parts |
Material: | Carbon Steel |
Surface Preparation: | Polishing |
###
Samples: |
US$ 2/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Material | Alloy, stainless steel, Carbon steel, etc. |
Mahines | NC lathe, Milling macine, Ginder, CNC, Gear milling machine. |
Third party inspection | Available, SGS, CNAS, BV, etc. |
UT standard | ASTM A388, AS1065, GB/T6402, etc. |
Packaging | Seaworthy packing |
Drawing format | PDF, DWG, DXF, STP, IGS, etc. |
Application | Industry usage, Machine usage. |
MOQ | 1 piece |
Drawing format | PDF, DWG, DXF, STP, IGS, etc. |
Quotation time | 1 days. |
Lead time | Generaly 30-40 days for mass production. |
US $5-40 / Piece | |
1 Piece (Min. Order) |
###
Casting Method: | Thermal Gravity Casting |
---|---|
Process: | CNC |
Molding Technics: | Gravity Casting |
Application: | Machinery Parts |
Material: | Carbon Steel |
Surface Preparation: | Polishing |
###
Samples: |
US$ 2/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Material | Alloy, stainless steel, Carbon steel, etc. |
Mahines | NC lathe, Milling macine, Ginder, CNC, Gear milling machine. |
Third party inspection | Available, SGS, CNAS, BV, etc. |
UT standard | ASTM A388, AS1065, GB/T6402, etc. |
Packaging | Seaworthy packing |
Drawing format | PDF, DWG, DXF, STP, IGS, etc. |
Application | Industry usage, Machine usage. |
MOQ | 1 piece |
Drawing format | PDF, DWG, DXF, STP, IGS, etc. |
Quotation time | 1 days. |
Lead time | Generaly 30-40 days for mass production. |
Driveshaft structure and vibrations associated with it
The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let's define what a driveshaft is.
transmission shaft
As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace one driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into four major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.
type
Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least one bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be two flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the two yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.
put up
The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least one end, and the at least one coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.
vibration
The most common cause of drive shaft vibration is improper installation. There are five common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you're not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.
cost
The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it's important to note that quality doesn't come cheap and you should always choose an axle based on what your budget can handle.
editor by czh 2023-01-28
China OEM gear reducer motor gearbox reducer high quality gearbox ev reductor gear box 90 degree shaft gear reducer qm gearbox k helical b with Good quality
parallel shaft gearmotor helical inline gearmotor motoreductor gearmotor reductor gear reducer with reducer backstop
F series gear reducer is 1 kind of parallel shaft helical gear reducer , which consist of 2 or 3 stageshelical gears (relate to gear ratio) in the same case . The hard tooth surface gear use the high quality alloy steel ,theprocess of carburizing and quenching, grinding ,which give it follow characters :Stable transmission ,low noiseand temperature ,high loading ,long working lift . Wide application ,specialize in Metallurgy ,Sewage treatment,Chemical Industry , Pharmacy ,Agriculture equipment and Oil industry
Specifications:1) Output speed: 0.6~1,571r/min2) Output torque: up to 21700N.m3) Motor power: 0.12~200kW4) Mounted form: foot-mounted and flange-mounted mounting
Product NameSLK Series Rigid Tooth helical bevel reducer Gear Material20CrMnTi Case MaterialHT250Shaft Material 20CrMnTiGear ProcessingGrinding finish by HOFLER Grinding MachinesColor CustomizedNoise Test65~70dBEfficiency94%~98% (depends on the transmission stage) Lubricating oilShell Omala synthetic oil or mineral oil , or similar brand Heat treatmenttempering, cementiting, quenching,etc.Brand of bearingsC&U bearing, ZWZ,LYC, HRB, SKF,NSK and so onBrand of oil sealNAK or other brandTemp. rise (MAX)40 °Temp. rise (Oil)(MAX)50 °Vibration≤20µ Original Advance mb170 marine gearbox in China m
Certifications
Packaging & Shipping
Packing Details: Standard carton/Pallet/Standard wooden case
Delivery Details : 7-20 working days upon payment
Company InformationAbout us
Established in 1985, CZPT TRANSMISSION MACHINERY CO., LTD is a high and new technology enterprise engaging in research, develop and manufacture for reducer & speed variator, 1 of the director member of China Reducer Association of China General Machinery.
It covers more than 40,000 square meters, has more than 400 staff , 20% of whom are technicians, equipped with more than 300 sets the most advanced accurate numerical control equipment, including German HOFLER forming gear grinding machine to improve quality.
set up more than 30 national sales branches to serve our customers in time and thoroughly.
Our products also exported to more than 30 countries main in Europe, Asia America, and Africa, with high reputation.
Trade Shows
Related Product
Main product list: 16 series including SLR/SLS/SLK/SLF series hard tooth flank gear reducer , SLRC series aluminium case helical gear reducers,SLHSLB series high power speed reducer, SLP series planetary speed reducer, X/B series cycloidal reducer, SLXG series shaft-mounted gear box, SLSWL series worm screw jack, SLT series helical cone gear box, altogether more than 10,000 ratios, various specification make us at the head of domestic transmission industry, widely serve the mechanical transmission field of light & heavy industry such as: beer & High precision high torque CZPT RV-E cycloidal gearbox reducer for robot joints beverage, mining machine, food packing, textile printing, rubber & plastic material, petrochemical industry, jack-up transportation, pharmacy & process hides, environmental protection equipment.
FAQ1.Payment Term: TT, L/C
2.Delivery time: about 30 days from receive payment.
3.We accept customized products as per your special requirement.
4.Xihu (West Lake) Dis.lines for the Selection:Usually we can select 1 machine which is suitable for you with some informations from you,such as ratio/motor speed/mounting dimension/ out torque etc.
5.If the minimum order amount is in excess of $10000, there are preferential.
Q1: What information should I tell you to confirm the product?
A:Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q2: What can i do if I don't know which 1 I need?
A:Dont worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q3: What is your product warranty period?
A:We offer 1 year warranty since the vessel departure date left China.
Q4: Are you trading company or manufacturer ?
A: We are factory.
Q5: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q6: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q7: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, Heavy duty V belt pulley sheaves machine V pulley mining machinery pulleys pls feel free to contact us as below:
Contact us
How to Choose the Right Worm Shaft
You might be curious to know how to choose the right Worm Shaft. In this article, you will learn about worm modules with the same pitch diameter, Double-thread worm gears, and Self-locking worm drive. Once you have chosen the proper Worm Shaft, you will find it easier to use the equipment in your home. There are many advantages to selecting the right Worm Shaft. Read on to learn more.
Concave shape
The concave shape of a worm's shaft is an important characteristic for the design of a worm gearing. Worm gearings can be found in a wide range of shapes, and the basic profile parameters are available in professional and firm literature. These parameters are used in geometry calculations, and a selection of the right worm gearing for a particular application can be based on these requirements.
The thread profile of a worm is defined by the tangent to the axis of its main cylinder. The teeth are shaped in a straight line with a slightly concave shape along the sides. It resembles a helical gear, and the profile of the worm itself is straight. This type of gearing is often used when the number of teeth is greater than a certain limit.
The geometry of a worm gear depends on the type and manufacturer. In the earliest days, worms were made similar to simple screw threads, and could be chased on a lathe. During this time, the worm was often made with straight-sided tools to produce threads in the acme plane. Later, grinding techniques improved the thread finish and reduced distortions resulting from hardening.
When a worm gearing has multiple teeth, the pitch angle is a key parameter. A greater pitch angle increases efficiency. If you want to increase the pitch angle without increasing the number of teeth, you can replace a worm pair with a different number of thread starts. The helix angle must increase while the center distance remains constant. A higher pitch angle, however, is almost never used for power transmissions.
The minimum number of gear teeth depends on the angle of pressure at zero gearing correction. The diameter of the worm is d1, and is based on a known module value, mx or mn. Generally, larger values of m are assigned to larger modules. And a smaller number of teeth is called a low pitch angle. In case of a low pitch angle, spiral gearing is used. The pitch angle of the worm gear is smaller than 10 degrees.
Multiple-thread worms
Multi-thread worms can be divided into sets of one, two, or four threads. The ratio is determined by the number of threads on each set and the number of teeth on the apparatus. The most common worm thread counts are 1,2,4, and 6. To find out how many threads you have, count the start and end of each thread and divide by two. Using this method, you will get the correct thread count every time.
The tangent plane of a worm's pitch profile changes as the worm moves lengthwise along the thread. The lead angle is greatest at the throat, and decreases on both sides. The curvature radius r" varies proportionally with the worm's radius, or pitch angle at the considered point. Hence, the worm leads angle, r, is increased with decreased inclination and decreases with increasing inclination.
Multi-thread worms are characterized by a constant leverage between the gear surface and the worm threads. The ratio of worm-tooth surfaces to the worm's length varies, which enables the wormgear to be adjusted in the same direction. To optimize the gear contact between the worm and gear, the tangent relationship between the two surfaces is optimal.
The efficiency of worm gear drives is largely dependent on the helix angle of the worm. Multiple thread worms can improve the efficiency of the worm gear drive by as much as 25 to 50% compared to single-thread worms. Worm gears are made of bronze, which reduces friction and heat on the worm's teeth. A specialized machine can cut the worm gears for maximum efficiency.
Double-thread worm gears
In many different applications, worm gears are used to drive a worm wheel. These gears are unique in that the worm cannot be reversed by the power applied to the worm wheel. Because of their self-locking properties, they can be used to prevent reversing motion, although this is not a dependable function. Applications for worm gears include hoisting equipment, elevators, chain blocks, fishing reels, and automotive power steering. Because of their compact size, these gears are often used in applications with limited space.
Worm sets typically exhibit more wear than other types of gears, and this means that they require more limited contact patterns in new parts. Worm wheel teeth are concave, making it difficult to measure tooth thickness with pins, balls, and gear tooth calipers. To measure tooth thickness, however, you can measure backlash, a measurement of the spacing between teeth in a gear. Backlash can vary from one worm gear to another, so it is important to check the backlash at several points. If the backlash is different in two places, this indicates that the teeth may have different spacing.
Single-thread worm gears provide high speed reduction but lower efficiency. A multi-thread worm gear can provide high efficiency and high speed, but this comes with a trade-off in terms of horsepower. However, there are many other applications for worm gears. In addition to heavy-duty applications, they are often used in light-duty gearboxes for a variety of functions. When used in conjunction with double-thread worms, they allow for a substantial speed reduction in one step.
Stainless-steel worm gears can be used in damp environments. The worm gear is not susceptible to rust and is ideal for wet and damp environments. The worm wheel's smooth surfaces make cleaning them easy. However, they do require lubricants. The most common lubricant for worm gears is mineral oil. This lubricant is designed to protect the worm drive.
Self-locking worm drive
A self-locking worm drive prevents the platform from moving backward when the motor stops. A dynamic self-locking worm drive is also possible but does not include a holding brake. This type of self-locking worm drive is not susceptible to vibrations, but may rattle if released. In addition, it may require an additional brake to keep the platform from moving. A positive brake may be necessary for safety.
A self-locking worm drive does not allow for the interchangeability of the driven and driving gears. This is unlike spur gear trains that allow both to interchange positions. In a self-locking worm drive, the driving gear is always engaged and the driven gear remains stationary. The drive mechanism locks automatically when the worm is operated in the wrong manner. Several sources of information on self-locking worm gears include the Machinery's Handbook.
A self-locking worm drive is not difficult to build and has a great mechanical advantage. In fact, the output of a self-locking worm drive cannot be backdriven by the input shaft. DIYers can build a self-locking worm drive by modifying threaded rods and off-the-shelf gears. However, it is easier to make a ratchet and pawl mechanism, and is significantly less expensive. However, it is important to understand that you can only drive one worm at a time.
Another advantage of a self-locking worm drive is the fact that it is not possible to interchange the input and output shafts. This is a major benefit of using such a mechanism, as you can achieve high gear reduction without increasing the size of the gear box. If you're thinking about buying a self-locking worm gear for a specific application, consider the following tips to make the right choice.
An enveloping worm gear set is best for applications requiring high accuracy and efficiency, and minimum backlash. Its teeth are shaped differently, and the worm's threads are modified to increase surface contact. They are more expensive to manufacture than their single-start counterparts, but this type is best for applications where accuracy is crucial. The worm drive is also a great option for heavy trucks because of their large size and high-torque capacity.
in Vancouver Canada sales price shop near me near me shop factory supplier OEM Gear and Shaft Set for Transmisson Gearbox manufacturer best Cost Custom Cheap wholesaler
EPG will constantly adhere to it company spirit of currently being sensible, progressive, effective and excellent to make the prime intercontinental transmission push. The new products incorporate a collection of large-tech and substantial good quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, high-velocity tooth chains, timing chains, self-lubrication chains, among which have variety high speed tooth chain for auto department dynamic box and aerial chains fill in the blanks of chain in China. In 2008, it was awarded with "Countrywide Export Commodity Inspection-free of charge Enterprise".
EPTT EPTT EPT EPTT, Ltd. was estabEPTTd in 1996. The business headquarter locates in HangEPT, EPTT Province, which is acknowledged as the birthplace of EPTT's shareEPTT economic climate. Our organization is a provincial large-tech EPTTrprise integrating R amp D, manufacturing and marketing EPTs for EPTTes utilised in automobiles and bikes and EPT EPTTs.
The firm's EPTern EPTT park production foundation addresses an spot of 80,000 sq. ft with the stXiHu (West EPT) Dis.Hu (West EPT) Dis.rdization of the XiHu (West EPT) Dis.Hu (West EPT) Dis.den-like modern day manufacturing unit plHangEPT and building. It is one of the top a hundred international high-tech EPTTrprises, crucial EPTT EPTTrprises and taxpayers in HangEPT EPTT. It has received the honors of quotkey spine EPTTrprises at HangEPT EPTT degree quot and quotwell-acknowledged emblems in EPTTizhou EPTT quot. The firm's EPTT cEPTTr has been appraised as the EPT cEPTTr in EPTTizhou EPTT amount.
The company's fixed assets have reached 200 million, with an annual potential of 12 million items. There are more than 500 employees, with total expert tools such as car, rolling, shaving, grinding, heat treatment and so on. Our firm has sturdy EPT and EPT EPTT producing, investigating and deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment abilities and owns more than four hundred sets of all types of gear, incXiHu (West EPT) Dis.Hu (West EPT) Dis. Germany, American and Japanese creation and measurement equipment.
The company strives for survival by high quality and adheres to the cultivation of core competitiveness. We has passed ISO 9001:2002 and ISO/TS16949:2009 good quality administration method certification successively. It has excellent measurement and testing technique, powerful good quality assurance ability and sturdy capacity of precision measurement, actual physical and chemical detection and metallographic examination.
The firm's quotEPTT quot EPT sells the country's main OEMs. It is the key supporting production units and excellent suppliers of popular domestic EPTTrprises such as ZheJiang EPTT EPTT, HangEPT SAIC, ZheJiang SAIC, ZheJiang Lingong, EPTT Geely EPTT , EPTTcheng Suzuki, XiHu (West EPT) Dis.hu (West EPT) Dis. Revo EPT Industry, EPTgchai Group, EPTchai, HangEPTng EPTcycle and so on.
The company adheres to the groundbreaking spirit of tough work, truthful management and groundbreaking spirit, adheres to the business philosophy of quotsatisfying, innovating and surpassing quot, adheres to the management plan of quotpeople-oriEPTTd quot, emphasis on stimulating and mobilizing people's initiative Enthusiasm and creative imagination to achieve the common deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment of workers and EPTTrprises. Consciously accept the optimum stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, go after large-end quality, meet client wants, and try for 1st-course performance.
EPTT EPTs a specialist personality, assures that the graphic of expert, high quality casts brand name, brand occupies the market deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment sample. Modern EPTT is just as the dawn of the millennium, typically climbing, more and more stunning, emitting charming mild.
Manufacture Capability
high quality management
EPTT
1. EPT: can be customerized
2. OEM offered
We manufacture: spur EPT ,ring EPT ,helical EPT ,EPTT EPT, planetary EPTT
one. EPT: can be customerized
two. Processing: Forged, EPTTd, heat therapy, grinding
3. EPTT: OEM,can make high-precision EPT and shaft,generally grade six~ quality 8.
4. Can design and style and manufacture as for each your drawing or sample
A Skilled on Drawing examination, Meeting speaking about, program auditing, Laptop amp QC.
China manufacturer & factory supplier for china in Malang Indonesia supplier ZDY ZLY ZSY type helical bevel gear reducer construction lifting hoist gearbox With high quality best price & service
No other assortment of chains can beat EPG for variety. In addition to traditional roller chains of all varieties and dimensions, roller chains with attachments and double pitch roller chains, we also supply particular chains this sort of as grip chains, accumulation chains, elastomeric profile chains, leaf chains, bushed conveyor chains, hollow pin chains and a lot of other models. Upkeep-free or corrosion-evidence chains are available for particular applications. Our pin oven chains and tube conveyor chains empower a wide range of remedies for the effective manufacturing and optimum conveying of cans and tubes. Uncover out far more about our productEPG has established up a complete established of quality management technique which is provided with advanced inspection and test gear.
Overview
Rapid Specifics
- Applicable Industries:
-
Producing Plant
- Product Quantity:
-
ZLY one hundred sixty 355 four hundred 450 five hundred
- Rated Power:
-
one.5~6229KW (tailored)
- Pole:
-
Single Two A few Stage Pace Reducer
- Ratio:
-
one.25-a hundred
- Housing Material:
-
Forged Iron
- Working temperature:
-
-forty~45℃
- Software:
-
for agricultural machinery mining, chemical market,metal ,lifting
- Method:
-
Carburizing, Nitriding , Grinding
- Efficiency:
-
94%~98%
- Mounting Situation:
-
Horizontal,Vertical,Flange
Offer Ability
- Supply Ability:
- 500 Set/Sets for every Month type helical bevel equipment development lifting hoist gearbox
Girard DYN assortment-2 Our range of worm gearboxes is especially suited to demanding stepper and servo motor apps.
Packaging & Shipping and delivery
- Packaging Details
- sea worthy wooden scenario for ZDY/ZLY/ZSY/ ZFY type helical bevel equipment building lifting hoist gearbox
- Port
- Qingdao Shanghai Ningbo Tianjin
On the internet Customization
Solution Description
YOUR Expert MANUFACTURE
—— Considering that 1995
Z Series Helical Gear Reducer
Z (ZDY, ZLY, ZSY, and ZFY) serieshard tooth surface cylindrical equipment reducer
D (DBY and DCY) series hard tooth surface cone gear reducer
Chinese speed reducer is commonly used in mining machinery, chemical industry,steel metallurgy, mild market,environmental safety, paper making, printing, lifting transportation, food market and so on.
Principal Series Product: R series helical gear reducer, K sequence spiral bevel equipment reducer, NGW, P series planetary reducer, H B collection gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical equipment reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloid reducer, and so forth. Meanwhile, map sample processing business can be carried out.
Feature:
-
Relevant to the metallurgical,power technology,water remedy,design,chemical,paper,
textiles,medication,foodstuff and other industries.
-
The transmission effectiveness of one-stage can attain up to ninety eight%, two-stage can reach 96%, three-phase can attain ninety four%.
-
The equipment processed by Carburizing & Grinding with higher precision.
-
Large precision gear, constant transmission, massive load potential
-
Prolonged support lifestyle.
- One Two 3 Stage Speed Reducer
Specification
ZDY/ZLY/ZSY/ ZFY sort helical bevel gear construction lifting hoist gearbox:
(you should get in touch with us for much more varieties & product)
Driven equipment | |||
Squander drinking water therapy | Thickeners,filter presses,flocculation apparata,aerators,raking gear,mixed longitudinal and rotary rakes,pre-thickeners,screw pumps,h2o turbines,centrifugal pumps | Dredgers | Bucket conveyors, dumping gadgets, carterpillar travelling gears, bucket wheel excavators as decide up, bucket wheel excavator for primitive material, cutter head, traversing gears |
Chemical inClose up of two yokes with the common joint. Be aware the slight oozing of grease from the UJ seal ends, the clump of grease is from inside the yoke splined shaft area --Travel (outer) yoke has a female (common spline) gap and “Y” form conclude that is the universal joint (UJ) mount. --UJ is a cross shaped casting having roller bearings enclosed with caps at all four points and is held into the yoke with 4 “C” clips --Interior yoke and drive shaft is yet another yoke welded to the push conclude, of the travel shaft. --Driven shaft and inner yoke is the driven shaft that rides within of the drive shaft and has a yoke welded at the pushed stop --UJ another UJ as abovedustry | Plate bending equipment, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges | Metallic doing work mills | plate tilters, ingot pushers, winding devices, cooling bed transfer frames, roller straigheners, desk ongoing intermittent, roller tables reversing tube mills, shears steady, casting motorists, reversing blooming mills |
Metal working mills | Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives | Conveyors | Bucket conveyors, hauling winches, hoists, belt conveyors, excellent lifts, passenger lifts, apron conveyors, escalators, rail travlling gears |
Frequency converters | Reciprocating compressors | ||
Cranes | Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes | Cooling towers | Cooling tower followers, blowers axial and radial |
Cane sugar generation | Cane knives, cane mills | Beet sugar manufacturing | Beet cossettes macerators, extraction crops, mechanical fridges, juice boilers, sugar beet washing equipment, sugar beet cutter |
Paper devices | Pulper drives | Cableways | Materials ropeways, continuous ropeway |
Cement sector | Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers |
Product assortment:
Closely making use of the best reduction ratio.
Reduction ratio = servo motor velocity / reducer output shaft pace
Torque calculation: Torque calculation is extremely crucial for the life of reducer, and spend focus to whether or not the optimum torque benefit (TP) of acceleration exceeds the greatest load torque of the reducer.
The applicable power is typically the applicable power of the servo models on the market, the applicability of the reducer is very large, the working coefficient can be taken care of earlier mentioned 1.2, but the choice can also be based on their personal wants to determine.ZSY collection two stage cylindrical transmission reducer for belt conveyor.ZLY collection 2 phase helical pace reducer for paper mill.1 10 ratio gearbox pace reducer for plastic extruder device.ZLY Rubber Extruder Mini Electric Motor Gear Pace Reducer.ZLY 2 stage helical cylindrical transmission gearbox for conveyor. ZDY/ZLY/ZSY/ ZFY kind helical bevel equipment construction lifting hoist gearbox.
Technological innovation
Chinese Electric powered Motor Gear Pace Reducer is a mechanical transmission in many fields of the national economic climate. The solution categories protected by the industry consist of all kinds of equipment reducer, planetary gear reducer and worm gearbox, as effectively as different unique transmission units these kinds of as velocity escalating system, velocity manage Units, including numerous sorts of versatile transmission units, this sort of as compound transmission. Items and solutions in the field of metallurgy, nonferrous metals, coal, creating materials, ships, h2o conservancy, electricity, building equipment and petrochemical industries.
In all fields of national financial system and national protection sector, gearbox items have a broad variety of purposes. Food light business, electric powered equipment, building equipment, metallurgy machinery, cement machinery, environmental safety equipment, digital appliances, road construction equipment, water conservancy machinery, chemical equipment, mining equipment, conveyor equipment, creating components equipment, rubber equipment, petroleum equipment and other industries have robust demand of Reducer products.ZSY collection two stage cylindrical transmission reducer for belt conveyor.ZLY series 2 phase helical speed reducer for paper mill.1 10 ratio gearbox speed reducer for plastic extruder equipment.ZLY Rubber Extruder Mini Electrical Motor Gear Pace Reducer.ZLY 2 stage helical cylindrical transmission gearbox for conveyor. ZDY/ZLY/ZSY/ ZFY sort helical bevel equipment construction lifting hoist gearbox.
Packaging & Delivery
Firm Details
Started in 1995, HangZhou Ever-Energy Power machinery Co.,Ltd has 22 many years of reducer production encounter and reliability. The firm has professional engineer crew, superior technologies generation and expert personnel, with located in HangZhou of ZheJiang province which has reliable industrial base and designed transportation.
FAQ
1.Q:Are you the manufacturing unit or trading business?
A:We are the specialist Manufacturing unit with 22 many years of encounter.
2.Q:Can you customize in accordance to our specifications?
A:Of course, we can style nonstandard goods in accordance to customer's drawing and sample.
3.Q:How long is the delivery day?
A:10-twenty functioning times.
4.Q:Exactly where is your factory?
A:We are in HangZhou of ZheJiang Province, you can get listed here by substantial speed prepare or fly to JinIt is our aim to supply a vast assortment of top quality products at reasonably priced costs, give the greatest services for customers satisfied and lead to our continued advancement. an.
Welcome to visit us!
Best China manufacturer & factory manufacturer in Thrissur India of New style fashion high precision helical gear worm gear reducer commutator good efficiency gearbox With high quality best price
Our producA power take-off or power takeoff (PTO) is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machine.ts are applied in many fields.
Overview
Quick Details
- Applicable Industries:
-
Manufacturing Plant
- Product name:
-
Gear reducer
- Color:
-
Customer Requirement
- Packing:
-
PLYWOOD
- Certification:
-
ISO9001
- Material:
-
Cast Iron
- MOQ:
-
1 PC
- Output Form:
-
Flange Output
- Warranty:
-
12 Months
- Mounting Position:
-
Horizontal (foot Mounted)
Supply Ability
- Supply Ability:
- 1111 Bag/Bags per Day
Packaging & Delivery
- Packaging Details
- PLYWOOD
- Port
- nb
-
Lead Time
: -
Quantity(Bags) 1 - 10 11 - 50 >50 Est. Time(days) 15 30 To be negotiated
Online Customization
Product Description
Product features |
1. R series helical gearmotor own rational design, compact construction, smaller size than X or B series cycloidal gearmotor at the same permitted torque. |
2. Little vibration and low noise, with high transmission efficiency. |
3. The material of gears is 20CrMnTi alloy steel and the hardness can reach to HRC58°~ 62° after tempering,cementiting, quenching etc. heat treatment. All the gears are processed by accurate grinding and the precision can reach to grade 6~5. |
4. The products have been mainly used in chemical machinery, cement agitator machinery, printing and packaging machinery, mine and power transmission machinery,metallurgy etc. |
Application:R series reducer is a kind of gear is used to reduce the motor speed and improve the output torque of the principle of speed reducer. It uses the gear and gear meshing, with advanced design and novel structure of retarding mechanism.It has been widely used in metallurgy, mining, petroleum, chemical industry, ship, light industry, food, textile, printing and dyeing. |
General Technical data | |
Housing material | HT250 high strength casting lron |
Housing hardness | HBS190-240 |
Gear material | 20CrMn Ti alloy steel |
Surface hardness of gears | HRC58°~62° |
Gear core hardness | HRC33~40 |
Input/output shaft material | 40CrMo alloy steel |
Input/output shaft hardness | HRC25In one way or another, all breathers let air flow between the inside and outside of the gear reducer as the unit warms during startup and cools after shutdown. If the breather is completely shielded from lubricant splash inside the reducer, almost any design will be effective. Unfortunately, this is usually not the case, particularly since most gear reducer housings can mount in a variety of positions. If the breather is exposed to oil splash, a bubble of oil typically forms across the breather's inside orifice, and escaping warm air carries it to the outside. Over time, these small droplets accumulate until the unit is visibly “leaking.”~30 |
Machining precision of gears | accurate grinding,6~7 Grade |
Lubricant oil | GB L-CKC220-460,Shell Omala220-460 |
Heat treatment | Tempering,Cementiting,Quenching,etc |
Efficiency | 94%~96% (depends on the transmission stage) |
Noise (MAX) | 60~68dB |
Temp.rise (MAX) | 40℃ |
Temp.rise (Oi) (MAX) | 50℃ |
Vibration | ≤20μm |
Backlash | ≤20Arcmin |
Brand of bearings | China Top brand HRB,LYC,ZWZ or other brands requested,NSK..... |
Brand of oil seal | NAK--- Taiwan or other brands requested |
Company Information
Packaging & Shipping
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: Can you do OEM for me?
A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.
Q4: What's your payment terms ?
A4: By T/T,LC AT SIGHT,30% deposit in advance, balance 70% before shipment.
Q5: How can I place the order?
A5: First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q6: When can I get the quotation ?
A6: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Main products include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing film, plough tip and share, cultivator tine, casting parts etc.
Best China manufacturer & factory WPA series single worm gear box 3 8 to 1 4 reducer transmission for gearbox 1:50 ratio speed reducer a234 wpb reducer gear box With high quality best price
With detailed requirments, we can also develop your special designed product. a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes....
Overview
Quick Details
- Applicable Industries:
-
Building Material Shops
- Gearing Arrangement:
-
worm
- Output Torque:
-
up to 5000Nm
- Input Speed:
-
750rpm -2000rpm
- Output Speed:
-
10-500rpm
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Color:
-
Customer Request
- Housing Material:
-
Cast Iron
- Shaft:
-
Inline
- Heat treatment:
-
Quenching
- Bearing material:
-
SKF,ZWZ
Supply Ability
- Supply Ability:
- 20000 Piece/Pieces per Month
EPG major production is of farming 15-500 horsepower tractor supporting machinery, mechanical cultivation, harvesting machinery and accessories.
Packaging & Delivery
- Packaging Details
- Standard export Packing(Carton Blanket+ wooden box)
- Port
- Ningbo or Shanghai
-
Lead Time
: -
Advantages of Worm Gears
Quantity(Boxes) 1 - 1000 >1000 Est. Time(days) 25 To be negotiated Shear bolt torque limiter (SB) EPG GROUP offers high quality PTO shafts with tubes fixed by spring pin, cross joints with roller bearings with rollers
Online Customization
Specification
gearbox reducer transmission gearbox electric motor reduction gearbox
1.Housing:iron cast
2. low noise(<50DB)
3.Model:WPA 40-250,Ratio:10 to 60
4.Efficient and safe operating
5.ISO9001,Factory price,OEM
6.Technology Data:
Type: | gearbox WPA |
Model: | WPA 40-250 |
Ratio: | 1:10,15,20,25,30,40,50,60 |
Color: | Blue/Silver Or On Customer Request |
Material: | Housing: Die-Cast Iron cast |
Worm Gear-Copper-10-3# | |
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC | |
Shaft-chromium steel-45# | |
Packing: | Carton and Wooden Case |
Bearing: | C&U Bearing |
Seal: | NAK SKF |
Warranty: | 1 Year |
Input Power: |
0.06KW,0.09KW |
Usages: | Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing, Woodworking,Glass. |
IEC Flange: |
56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON |
Lubricant: | Synthetic&Mineral |
Certifications
Trade Shows
Packaging & Shipping
Packing Details : Standard carton/Pallet/Standard wooden case
Delivery Details : 15-30 working days upon payment
Company Information
other series product
Precision Planetary gearbox | Robot RV gearbox speed reducer |
Custom made Non-standard Gearbox | UDL Series Variator |
PYZ Series Helical Tooth Shaft Mounted Reducer | 8000 Series Cycloidal Reducer |
SLT Series Spiral Bevel Gearbox | SLSWL Series Worm Screw Jack |
SLP Series Planetary Reducer | SLH/SLB Series High Power Reducer |
NMRV Series Worm Reducer | BKM Series Helical-hypoid Reducer |
SLRC Series Helical Reducer | SLSMR Series Shaft Mounted Reducer |
SLXG Series Shaft Mounted Reducer | X/B Series Cycloidal Reducer |
SLR/SLF/SLK/SLS Series Helical Reducer |
Related Products
Contact
Best China manufacturer & factory 2020 china supplier NMRV Type Right Angle Speed Lawn Mower Gearbox worm gear dc motor With high quality best price
EPG is one of the biggest manufacturers in China. We have advanced machines for production and new technology testing ability . Through adopting new technology from British, German, U.S.A, our products are best sellers all over European, America, and Southeast Asia.
Overview
Quick Details
- Applicable Industries:
-
Manufacturing Plant
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Pole:
-
one two three four six Stage
- Ratio:
-
11-87
- Housing Material:
-
Cast Iron
- Working temperature:
-
-40~45℃
--Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.
- Application:
-
production equipment soap
- Process:
-
Carburizing, Nitriding , Grinding
- Mounting Position:
-
Horizontal,Vertical,Flange
- Color:
-
Blue,Green,Gray,Red
Packaging & Delivery
-
Lead Time
: -
Quantity(Bags) 1 - 1 >1 Est. Time(days) 5 To be negotiated
Online Customization
Product Description
YOUR PROFESSIONAL MANUFACTURE
—— SINCE 1995
NMRV Worm Gear Reducer Gearbox
TianQi——industrial manufacturers
Worm Gear Box Reducer Gearbox price with motor for robot arm
Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light industry,environmental protection, paper making, printing, lifting transport, food industry and so on.
Main Series Product: R series helical gear reducer, K series spiral bevel gear reducer, NGW, P series planetary reducer, H B series gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gear reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloid reducer, etc. Meanwhile, map sample processing business can be undertaken.
Cycloidal Pinwheel Reducer is a speed reducing construction with advance design,novel structure adopting the principle of planet driving and the falling-in of cycloidal pin gear. It is widely applied to the speed reducing structure of various driving machineries ,such as lift ,transportation,mine,metallurgy,petrolchemical,texitile,prention,lightindustry,pharmacy,food,forage,food machinery,ect.
Specification
NMRV Worm Gear Box Reducer worm gear dc motor:
(please contact us for more types & model)
Mounting Diamensions
Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide.H B series standard industrial gear box reducer.Industrial Right Angle Transmission Gearbox price.Gearbox Manufacturer helical gear design gearbox with moderate price. NMRV 063 050 type Worm Gear Box Reducer Gearbox price for robot arm.
Driven machines | |||
Waste water treatment | Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps | Dredgers | Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears |
Chemical industry | Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges | Metal working mills | plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing blooming mills |
Metal working mills | Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives | Conveyors | Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears |
Frequency converters | Reciprocating compressors | ||
Cranes | Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes | Cooling towers | Cooling tower fans, blowers axial and radial |
Cane sugar production | Cane knives, cane mills | Beet sugar production | Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter |
Paper machines | Pulper drives | Cableways | Material ropeways, continuous ropeway |
Cement industry | Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers |
Technology
Feature:
- 1. Big Volecity- Reducing Ratio:Ratio of single-stage speed-reducing is 1/11-1/87; Ratio of double stage speed-reducing is 1/112-1/5133;Ratio of three-stage speed-reducing is 1/2057-1/446571;more-stages can be combined according to the requirement.
-
2. High driving efficiency:Due to adopting rolling engagement in falling-in part, the driving efficiency can reach above 90%.
-
3. Small in size, light weight: with compacted structure,small size and light weight. Due to adopting the principle of planet driving so that the input and output shaft in the same axis which will integrated with the motor.
-
4. Long service life: Has good resistance to abrasion because the main driving engaging parts are made of bearing steel and applying rolling friction.
-
5. Stable running: for most driving procedure, we adopt multi-teeth falling-in. Then the running will be stable with low noise.
-
6. Convenient dismounting:reasonable structure and design.
-
7. Strong overloading ability,anti-compact,suitable for frequently start and double-side rotation.
Chinese Speed Reducer is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm gearbox, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machineryThe company was certified by ISO9001:2008 Quality Management System. and petrochemical industries.
In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.Industrial Right Angle Transmission Gearbox price.Gearbox Manufacturer helical gear design gearbox with moderate price.Chinese Manufacture cycloid gearbox for iron and steel industry. NMRV 063 050 type Worm Gear Box Reducer Gearbox price for robot arm.
Our Services
Packaging & Shipping
Company Information
EPG is a professiWorm gears are typically manufactured by hobbing with a hob or cutting tool very similar to the worm that the gear mates with. The worm may be turned, hobbed, milled, or ground.onal manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look forward to speaking with you to future discuss how we can be of service to you.
FAQ
1.Q:Are you the factory or trading company?
A:We are the professional Factory with 22 years of experience.
2.Q:Can you customize according to our requirements?
A:Yes, we can design nonstandard products according to customer's drawing and sample.
3.Q:How long is the delivery date?
A:10-20 working days.
4.Q:Where is your factory?
A:We are in Zibo of Shandong Province, you can get here by high speed train or fly to Jinan.
Welcome to visit us!
Best China manufacturer & factory China gear producer gear reduction motor gearbox machine With high quality best price
FURTHERMORE, WE CAN PRODUCE CUSTOMIZED VARIATORS, GEARED MOTORS, ELECTRIC MOTORS AND OTHER HYDRAULIC PRODUCTS ACCORDING TO CUSTOMERS’ DRAWINGS.
Overview
Advantages of Worm Gears
Quick Details
- Applicable Industries:
-
Building Material Shops, Manufacturing Plant, Machinery Repair Shops
- Gearing Arrangement:
-
Helical
- Output Torque:
-
Max. 50000N.m
- Input Speed:
-
1440rpm
EPG is willing to cooperate sincerely and develop commonly with friends!
- Output Speed:
-
8-300rpm
- Place of Origin:Zhejiang, China
- The PTO shaft included with all Victory Tractor mowers has a longer extension than the typical PTO Shaft. The added length is necessary because of the far reaching movement of the mowers to the right of the tractor.
Brand Name: -
OEM
- Product Name:
-
China gear producer gear reduction motor gearbox machine
- Mounting Position:
-
As Required
- Warranty:
-
12 Months
- Certificate:
-
CE; ISO9001
Supply Ability
- Supply Ability:
- 200000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Standard export packing and wood pallet packing
- Port
- SHANGHAI or NINGBO Port
Online Customization
Product Description
China gear producer gear reduction motor gearbox machine
Different Mounting Postion of China gear producer gear reduction motor gearbox machine
Excellent Features of China gear producer gear reduction motor gearbox machine
1. Inline Helical Gearbox is characterised by compact structure, light weight, large torque and excellent performance.
2. It is made of rib-reinforced rigid case and premium alloy-steel gear which is hardened by carbon penetration and grinded precisely. Stable in running, low noise, large in load, low in consumption, efficient in transmission, low in temperature rise, and long in service life.
3. The mounting styles are footing, flange, torque arm and so on. The output style are shaft, hollow shaft, the alpine and shrink disc are for choice.
Packing & Delivery
Packing Images of China gear producer gear reduction motor gearbox machine
Inner Packing: PP bag with carton;
Outer Packing: Wooden case;
Shipment: 14-20 days upon receiving the deposit.
About Us
Ever_power GROUP is the first and largest worm gearbox manufacturer in China, established in 1976, specialising in the production of a wide variety of transmission machinery. With more than 40 years experience in the industry, our assets now total 117.2 million dollars, and we have 2 subsidiary companies, 8 holding companies, and 12 joint-stock companies.
We can produce 400,000 units of worm gearboxes, 100,000 units of gear reducers, 50,000 units of other speed reducers, 150,000 units of flexible couplings, and 100,000 units of speed-reducer accessories every year.
70% of our products have been exported to 40 more countries, and our customers come from Italy, Germany, USA, Canada, Spain, UK, India, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries. 30% of them are OEM made for direct manufacturers of other products.
FAQ
Q1. Is your quality good?
A1: Quality never tell lies, we're the largest manufacturer and exporter of worm gear reducer in Asia, the first reducers and gearboxes manufacturer in China, who has been given license since 1993. Also, we had achieved ISO9001 and CE Certificate among all manufacturers.
Q2. How is your price? Can you offer any discount?
A2: We will give the best price we can base on your needs and the quantities.
Q3. Do you offer any visiting?
A3: Yes! We sincerely invite you to visit us! We can pick you from airport, railway station and so on. Also, we can arrange housing for you. Please let us know in advanced.
Q4. When is the best time to contact you?
A4: You can contact us by email any time, we will reply you ASAP. If you want contact by phone, our working hour is Mon-Sat 9am-17:30pm.
Contact
Ever_power GROUP
Address: No.789-B8Shenhua Road, XiHu Dsitriction Enco&Tech Development Zone HangZhou City, ZJ, P.R.
Tel: 0086-571-88220971/Mob: +86 13083988828
WhatsApp/Skype: +86 13083988828
Website: www.hzpt.com