Tag Archives: worm gearbox

China RV Series Worm Drive Gearbox Hollow Shaft Output custom drive shaft

Item Description

RV Collection Worm Travel Gearbox Hollow Shaft Output

RV Collection
Which includes RV / NMRV / NRV.
Main Characteristic of RV Collection Worm Gearbox
RV series worm equipment reducer is a new-era item developed by CZPT on the basis of perfecting WJ sequence products with a compromise of innovative technological innovation equally at house and overseas.
one. Large-good quality aluminum alloy, gentle in weight and non-rusting.
two. Huge in output torque.
three. Smooth working and reduced sounds,resilient in dreadful circumstances.
4. High radiation efficiency.
five. Good-hunting look, tough in service daily life and small quantity.
six. Appropriate for omnibearing installation.
Principal Resources of RV Sequence Worm Gearbox
1. Housing: die-forged aluminum alloy(body dimensions: 571 to 090), forged iron(body size: 110 to 150).
2. Worm: 20Crm, carbonization quencher warmth treatment method makes the surface hardness of worm gears up to 56-sixty two HRX, keep carbonization layer's thickness amongst .3 and .5mm following precise grinding.
3. Worm Wheel: wearable stannum bronze alloy.

SPEED RATIO	7.5~100
OUTPUT TORQUE	<1050NM
IN POWER	.09-11KW
MOUNTING TYPE	FOOT-MOUNTED FLANGE-MOUNTED

When doing work, excellent load potential, secure managing, low sounds with substantial performance.
Equipment Box's Usage Field
one	Metallurgy				eleven	Agitator
two	Mine				12	Rotary weeder
three	Machine				thirteen	Metallurgy
4	Vitality				fourteen	Compressor
5	Transmission				fifteen	Petroleum sector
six	Water Conserbancy				sixteen	Air Compressor
7	Tomacco				seventeen	Crusher
8	Health-related				18	Materials
9	Packing				19	Electronics
10	Chemical business				twenty	Textile indutry
...					...
Power	.06kw	.09kw	.12kw	.18kw	.25kw	.37kw	.55kw
	.75kw	one.1kw	one.5kw	two.2kw	3kw	4kw	5.5kw
	seven.5kw	11kw	15kw
Torque	2.6N.m-3000N.m
Ratio	7.5-100, the double gearbox is much more
Coloration	Blue, Silver or as customers' want
Substance	Iron or Aluminium
Packing	Carton with Plywood Case or as clients' necessity
Type	RV571	RV030	RV040	RV050	RV063	RV075	RV090
Weight	.7kg	one.3kg	2.3kg	three.5kg	six.2kg	9kg	13kg
Type	RV110	RV130	RV150
Bodyweight	35kg	60kg	84kg
Mounting Techniques	Foot Set up				Flange Installation
Mounting Techniques	For various mortor or double input/output shafts can be equipped

Solution photo:

Construction:

Certificate:

Packing & Supply:

Our organization :
AOKMAN was launched in 1982, which has more than 36 many years in R & D and production of gearboxes, gears, shaft, motor and spare parts.
We can offer you the correct remedy for uncountable apps. Our items are extensively employed in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcoholic beverages industry and a variety of other kinds of equipment with a strong presence in the international market.
AOKMAN has turn into a reliable provider, in a position to source high quality gearboxes.With 36 many years encounter, we guarantee you the utmost reliability and safety for equally merchandise and solutions.
Consumer going to:

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Primary merchandise of our business: UDL collection speed variator,RV sequence worm equipment reducer, ATA sequence shaft mounted gearbox, X,B series gear reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and thousands of requirements
two.Q:Can you make as for every custom made drawing?
A: Indeed, we provide custom-made service for clients.
3.Q:What is your phrases of payment ?
A: 30% Advance payment by T/T after signing the deal.70% prior to supply
4.Q:What is your MOQ?
A: 1 Set
Speak to:

Welcome you contace me if you are intrigued in our solution.
Our crew will help any want you may possibly have.

/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery, Industry
Function:	Speed Changing, Speed Reduction
Layout:	Orthogonal
Hardness:	Hardened
Installation:	Horizontal Type
Step:	Single-Step

###

Customization:	Available \|

###

SPEED RATIO	7.5~100
OUTPUT TORQUE	<1050NM
IN POWER	0.09-11KW
MOUNTING TYPE	FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with high efficiency.
Gear Box's Usage Field
1	Metallurgy				11	Agitator
2	Mine				12	Rotary weeder
3	Machine				13	Metallurgy
4	Energy				14	Compressor
5	Transmission				15	Petroleum industry
6	Water Conserbancy				16	Air Compressor
7	Tomacco				17	Crusher
8	Medical				18	Materials
9	Packing				19	Electronics
10	Chemical industry				20	Textile indutry
...					...
Power	0.06kw	0.09kw	0.12kw	0.18kw	0.25kw	0.37kw	0.55kw
	0.75kw	1.1kw	1.5kw	2.2kw	3kw	4kw	5.5kw
	7.5kw	11kw	15kw
Torque	2.6N.m-3000N.m
Ratio	7.5-100, the double gearbox is more
Color	Blue, Silver or as customers' need
Material	Iron or Aluminium
Packing	Carton with Plywood Case or as clients' requirement
Type	RV025	RV030	RV040	RV050	RV063	RV075	RV090
Weight	0.7kg	1.3kg	2.3kg	3.5kg	6.2kg	9kg	13kg
Type	RV110	RV130	RV150
Weight	35kg	60kg	84kg
Mounting Methods	Foot Installation				Flange Installation
Mounting Methods	For various mortor or double input/output shafts can be equipped

/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery, Industry
Function:	Speed Changing, Speed Reduction
Layout:	Orthogonal
Hardness:	Hardened
Installation:	Horizontal Type
Step:	Single-Step

###

Customization:	Available \|

###

SPEED RATIO	7.5~100
OUTPUT TORQUE	<1050NM
IN POWER	0.09-11KW
MOUNTING TYPE	FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with high efficiency.
Gear Box's Usage Field
1	Metallurgy				11	Agitator
2	Mine				12	Rotary weeder
3	Machine				13	Metallurgy
4	Energy				14	Compressor
5	Transmission				15	Petroleum industry
6	Water Conserbancy				16	Air Compressor
7	Tomacco				17	Crusher
8	Medical				18	Materials
9	Packing				19	Electronics
10	Chemical industry				20	Textile indutry
...					...
Power	0.06kw	0.09kw	0.12kw	0.18kw	0.25kw	0.37kw	0.55kw
	0.75kw	1.1kw	1.5kw	2.2kw	3kw	4kw	5.5kw
	7.5kw	11kw	15kw
Torque	2.6N.m-3000N.m
Ratio	7.5-100, the double gearbox is more
Color	Blue, Silver or as customers' need
Material	Iron or Aluminium
Packing	Carton with Plywood Case or as clients' requirement
Type	RV025	RV030	RV040	RV050	RV063	RV075	RV090
Weight	0.7kg	1.3kg	2.3kg	3.5kg	6.2kg	9kg	13kg
Type	RV110	RV130	RV150
Weight	35kg	60kg	84kg
Mounting Methods	Foot Installation				Flange Installation
Mounting Methods	For various mortor or double input/output shafts can be equipped

How to Replace the Drive Shaft

Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.
air-compressor

Repair damaged driveshafts

If you own a car, you should know that the driveshaft is an integral part of the vehicle's driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You'll save hundreds of dollars if you're able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don't want to spend money on unnecessarily expensive repairs, you may need to pay a little more.
air-compressor

Learn how drive shafts work

While a car engine may be one of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is one of them. This is the last stop before the wheels spin. CV joints are also known as "doughnut" joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.
air-compressor

Common signs of damaged driveshafts

If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be one of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle's performance. When one or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle's driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.

China RV Series Worm Drive Gearbox Hollow Shaft Output custom drive shaft
editor by CX 2023-03-27

China Worm Gear Drive Wheel Good Price Ground Shaft Helical Micro for Gearbox Speed Reducer Outdoor Ride Car Spare Part Worm Gear drive shaft shop

Merchandise Description

Our Rewards

Our advantange, Reduced MOQ as significantly less as 1 piece, one hundred% inspection, Quick Direct time.

Our support

We manufacture a variety of shafts made according to drawing, like roud shaft, sq. shaft, hollow shaft, screw shaft, spline shaft, gear shaft, etc.

Materials	Alloy, stainless steel, Carbon steel, etc.
Mahines	NC lathe, Milling macine, Ginder, CNC, Equipment milling device.
Third get together inspection	Available, SGS, CNAS, BV, and so forth.
UT common	ASTM A388, AS1065, GB/T6402, and many others.
Packaging	Seaworthy packing
Drawing format	PDF, DWG, DXF, STP, IGS, and so forth.
Application	Industry usage, Equipment utilization.
MOQ	1 piece
Drawing format	PDF, DWG, DXF, STP, IGS, and so on.
Quotation time	1 times.
Lead time	Generaly 30-forty days for mass manufacturing.

Our Merchandise

Throughout the go ten years, we have supplied hundreds of buyers with excellent precision machining jobs:

Workshop & machining approach

We manufacture various shafts produced in accordance to drawing, such as roud shaft, square shaft, hollow shaft, screw shaft, spline shaft, equipment shaft, etc.

FAQ

Q: Are you treading organization or manufacturer?
A: We are manufacturer.

Q: How about your MOQ?
A: We give both prototype and mass production, Our MOQ is 1 piece.

Q:How lengthy can I get a quote following RFQ?
A:we normally estimate you inside 24 hrs. A lot more element information provided will be valuable to help save your time.
one) in depth engineering drawing with tolerance and other necessity.
2) the amount you desire.

Q:How is your top quality guarantee?
A:we do one hundred% inspection before shipping, we are hunting for prolonged term company relationship.

Q:Can I sign NDA with you?
A:Certain, we will keep your drawing and information confidential.

US $5-40
/ Piece
| 1 Piece

(Min. Order)

###

Casting Method:	Thermal Gravity Casting
Process:	CNC
Molding Technics:	Gravity Casting
Application:	Machinery Parts
Material:	Carbon Steel
Surface Preparation:	Polishing

###

Samples:	US$ 2/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Material	Alloy, stainless steel, Carbon steel, etc.
Mahines	NC lathe, Milling macine, Ginder, CNC, Gear milling machine.
Third party inspection	Available, SGS, CNAS, BV, etc.
UT standard	ASTM A388, AS1065, GB/T6402, etc.
Packaging	Seaworthy packing
Drawing format	PDF, DWG, DXF, STP, IGS, etc.
Application	Industry usage, Machine usage.
MOQ	1 piece
Drawing format	PDF, DWG, DXF, STP, IGS, etc.
Quotation time	1 days.
Lead time	Generaly 30-40 days for mass production.

US $5-40
/ Piece
| 1 Piece

(Min. Order)

###

Casting Method:	Thermal Gravity Casting
Process:	CNC
Molding Technics:	Gravity Casting
Application:	Machinery Parts
Material:	Carbon Steel
Surface Preparation:	Polishing

###

Samples:	US$ 2/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Material	Alloy, stainless steel, Carbon steel, etc.
Mahines	NC lathe, Milling macine, Ginder, CNC, Gear milling machine.
Third party inspection	Available, SGS, CNAS, BV, etc.
UT standard	ASTM A388, AS1065, GB/T6402, etc.
Packaging	Seaworthy packing
Drawing format	PDF, DWG, DXF, STP, IGS, etc.
Application	Industry usage, Machine usage.
MOQ	1 piece
Drawing format	PDF, DWG, DXF, STP, IGS, etc.
Quotation time	1 days.
Lead time	Generaly 30-40 days for mass production.

Driveshaft structure and vibrations associated with it

The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let's define what a driveshaft is.
air-compressor

transmission shaft

As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace one driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into four major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.

type

Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least one bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be two flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the two yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.
air-compressor

put up

The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least one end, and the at least one coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.

vibration

The most common cause of drive shaft vibration is improper installation. There are five common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you're not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.
air-compressor

cost

The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it's important to note that quality doesn't come cheap and you should always choose an axle based on what your budget can handle.

China Worm Gear Drive Wheel Good Price Ground Shaft Helical Micro for Gearbox Speed Reducer Outdoor Ride Car Spare Part Worm Gear drive shaft shop
editor by czh 2023-01-28

China high quality Right Angle Shaft Mounted Gearbox NRV Output Flange Mounted Worm Gearbox wholesaler

Right Angle Shaft Mounted Gearbox NRV Output Flange Mounted Worm Gearbox

Specification

Type:
Worm Gear Speed Reducer

Model:
NRV571,030,040,050,063,075,090,110,130,150

Ratio:
1:5,7.5,10,15,20,25,30,40,50,60,80,100

Color:
Blue/Silver or on customer request

Housing
Aluminum alloy and casting iron

Packing
Carton/Wooden case

Bearing:
C&U Bearing

Seal:
NAK , SKF

Warranty:
1 Year

Input power:
0.06kw,0.09kw,0.12kw, Nylon Flange SleeveBushing 0.18kw,0.25kw,0.37kw,0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,3kw,4kw,5.5kw,7.5kw,11kw,15kw

Usages:
Industrial Machine: Food Stuff, Ceramics ,CHEMICAL, Packing ,Dyeing ,Wooding working ,Glass

IEC Flange:
56B5,56B14,63B5,63B14,71B5,71B14, Diebold Nixdorf ATM Parts Shaft Bearing Shaft Assembly 49257190000A 49-257190-000A Diebold Opteva Shaft XPRT Drive Non Groove 80B5,80B14,90B5,90B14,100B5,100B14,112B5,112B14,132B5,160B5

Lubricant:
Synthetic & Mineral

Predisposition

Mounting Positions

Packaging & Shipping

Our Services

(1) With excellent quality(2) Reasonable price(3) Promise to delivery on time(4) Large output torque(5) Safe, reliable, economical and durable(6) Stable transmission, quiet operation(7) High heat-radiating efficiency, high carrying ability(8) Certificate of quality: ISO9001:2008(9) Every product must be tested before sending(10)Made of high-quality aluminum alloy, light weight and non-rusting(11)Large output torque.(12) Smooth running and low noise.(13) High radiating efficiency.(14) Good-looking appearance, durable service life and small volume.(15) Suitable for Omni bearing installation.

Company Information
HangZhou Wanxing Reducer Co.,Ltd is specialized in R&D,manufacture and sales of transmissions. By taking the aim of "quality first and credit first", we always strive for survival on the basis of quality and credit and strive for development on the basis of technology since our company was built as well as is the first to pass ISO9001:2000 International Quality System Certificate.

FAQ
1. Q: What’s type of your company.
A: We are manufacturer.
2. Q: what should I provide when I choose gearbox/speed reducer?
A: 1) load condition
2) speed of rotation or speed ratio(combination with combine speed reducer can get extra low out putting rotational speed)
3) work circumstance(temperature, humidty, custom big and small rubber bushing corrosion etc.)
4) space of installation
3. Q: How long dose it take to finish my order?
A: It depends on your quantity. Generally 25days for 1 20GP, 35days for 1 40HQ.
4. Q: How can i know the process of my order?
A: Detailed picture of the production process will be sent to you to confirm before shipping.
Consummation QC system makes it possible to offer you reliable quality

Contacts
Any query, feel free to contact me at any time.

What Is a Worm Gear Reducer?

If you have never seen a worm gear reducer before, you're missing out! Learn more about these incredible gears and their applications by reading this article! In addition to worm gear reducers, learn about worms and how they're made. You'll also discover what types of machines can benefit from worm gears, such as rock crushers and elevators. The following information will help you understand what a worm gear reducer is and how to find one in your area.
worm shaft

Typical worm shaft

A typical worm has two shafts, one for advancing and one for receding, which form the axial pitch of the gear. Usually, there are eight standard axial pitches, which establish a basic dimension for worm production and inspection. The axial pitch of the worm equals the circular pitch of the gear in the central plane and the master lead cam's radial pitch. A single set of change gears and one master lead cam are used to produce each size of worm.
Worm gear is commonly used to manufacture a worm shaft. It is a reliable and efficient gear reduction system that does not move when the power is removed. Typical worm gears come in standard sizes as well as assisted systems. Manufacturers can be found online. Listed below are some common materials for worm gears. There are also many options for lubrication. The worm gear is typically made from case hardened steel or bronze. Non-metallic materials are also used in light-duty applications.
A self-locking worm gear prevents the worm from moving backwards. Typical worm gears are generally self-locking when the lead angle is less than 11 degrees. However, this feature can be detrimental to systems that require reverse sensitivity. If the lead angle is less than four degrees, back-driving is unlikely. However, if fail-safe protection is a prerequisite, back-driving worm gears must have a positive brake to avoid reverse movement.
Worm gears are often used in transmission applications. They are a more efficient way to reduce the speed of a machine compared to conventional gear sets. Their reduced speed is possible thanks to their low ratio and few components. Unlike conventional gear sets, worm gears require less maintenance and lower mechanical failure than a conventional gear set. While they require fewer parts, worm gears are also more durable than conventional gear sets.
There are two types of worm tooth forms. Convex and involute helicoids have different types of teeth. The former uses a straight line to intersect the involute worm generating line. The latter, on the other hand, uses a trapezoid based on the central cross section of the root. Both of these tooth forms are used in the production of worms. And they have various variations in pitch diameter.
worm shaft

Types of worms

Worms have several forms of tooth. For convenience in production, a trapezoid-based tooth form is used. Other forms include an involute helicoidal or a convolute worm generating a line. The following is a description of each type. All types are similar, and some may be preferred over others. Listed below are the three most common worm shaft types. Each type has its own advantages and disadvantages.
Discrete versus parallel axis: The design of a worm gear determines its ratio of torque. It's a combination of two different metals - one for the worm and one for the wheel - which helps it absorb shock loads. Construction equipment and off-road vehicles typically require varying torques to maneuver over different terrain. A worm gear system can help them maneuver over uneven terrain without causing excessive wear.
Worm gear units have the highest ratio. The sliding action of the worm shaft results in a high self-locking torque. Depending on the angle of inclination and friction, a worm gear can reach up to 100:1! Worm gears can be made of different materials depending on their inclination and friction angle. Worm gears are also useful for gear reduction applications, such as lubrication or grinding. However, you should consider that heavier gears tend to be harder to reverse than lighter ones.
Metal alloy: Stainless steel, brass, and aluminum bronze are common materials for worm gears. All three types have unique advantages. A bronze worm gear is typically composed of a combination of copper, zinc, and tin. A bronze shaft is more corrosive than a brass one, but it is a durable and corrosion-resistant option. Metal alloys: These materials are used for both the worm wheel.
The efficiency of worm gears depends on the assembly conditions and the lubricant. A 30:1 ratio reduces the efficiency to 81:1%. A worm gear is more efficient at higher ratios than an helical gear, but a 30:1 ratio reduces the efficiency to 81%. A helical gear reduces speed while preserving torque to around 15% of the original speed. The difference in efficiency between worm gear and helical gear is about half an hour!

Methods of manufacturing worm shafts

Several methods of manufacturing worm shafts are available in the market. Single-pointed lathe tools or end mills are the most popular methods for manufacturing worms. These tools are capable of producing worms with different pressure angles depending on their diameter, the depth of thread, and the grinding wheel's diameter. The diagram below shows how different pressure angles influence the profile of worms manufactured using different cutting tools.
The method for making worm shafts involves the process of establishing the proper outer diameter of a common worm shaft blank. This may include considering the number of reduction ratios in a family, the distance between the worm shaft and the gear set center, as well as the torques involved. These processes are also referred to as 'thread assembly'. Each process can be further refined if the desired axial pitch can be achieved.
The axial pitch of a worm must match the circular pitch of the larger gear. This is called the pitch. The pitch diameter and axial pitch must be equal. Worms can be left-handed or right-handed. The lead, which refers to the distance a point on the thread travels during one revolution of the worm, is defined by its angle of tangent to the helix on the pitch of the cylinder.
Worm shafts are commonly manufactured using a worm gear. Worm gears can be used in different applications because they offer fine adjustment and high gear reduction. They can be made in both standard sizes and assisted systems. Worm shaft manufacturers can be found online. Alternatively, you can contact a manufacturer directly to get your worm gears manufactured. The process will take only a few minutes. If you are looking for a manufacturer of worm gears, you can browse a directory.
Worm gears are made with hardened metal. The worm wheel and gear are yellow in color. A compounded oil with rust and oxidation inhibitors is also used to make worm gears. These oils adhere to the shaft walls and make a protective barrier between the surfaces. If the compounded oil is applied correctly, the worm gear will reduce the noise in a motor, resulting in a smoother performance.
worm shaft

applications for worm gear reducers

Worm gears are widely used in power transmission applications, providing a compact, high reduction, low-speed drive. To determine the torque ratio of worm gears, a numerical model was developed that makes use of the equation of displacement compatibility and the influence coefficient method, which provides fast computing. The numerical model also incorporates bending deflections of the gear surfaces and the mating surfaces. It is based on the Boussinesq theory, which calculates local contact deformations.
Worm gears can be designed to be right or left-handed, and the worm can turn either clockwise or counter-clockwise. An internal helical gear requires the same hand to operate both parts. In contrast, an external helical gear must be operated by the opposite hand. The same principle applies to worm gears in other applications. The torque and power transferred can be large, but worm gears are able to cope with large reductions in both directions.
Worm gears are extremely useful in industrial machinery designs. They reduce noise levels, save space, and give machines extra precision and fast-stopping capabilities. Worm gears are also available in compact versions, making them ideal for hoisting applications. This type of gear reducer is used in industrial settings where space is an issue. Its smaller size and less noise makes it ideal for applications that need the machine to stop quickly.
A double-throated worm gear offers the highest load capacity while still remaining compact. The double-throated version features concave teeth on both worm and gear, doubling the contact area between them. Worm gears are also useful for low to moderate-horsepower applications, and their high ratios, high output torque, and significant speed reduction make them a desirable choice for many applications. Worm gears are also quieter than other types of gears, reducing the noise and vibrations that they cause.
Worm gears have numerous advantages over other types of gears. They have high levels of conformity and can be classified as a screw pair within a lower-pair gear family. Worm gears are also known to have a high degree of relative sliding. Worm gears are often made of hardened steel or phosphor-bronze, which provides good surface finish and rigid positioning. Worm gears are lubricated with special lubricants that contain surface-active additives. Worm gear lubrication is a mixed lubrication process and causes mild wear and tear.

China high quality Right Angle Shaft Mounted Gearbox NRV Output Flange Mounted Worm Gearbox wholesaler

in Austin United States sales price shop near me near me shop factory supplier Hollow Shaft Helical Worm Gearbox manufacturer best Cost Custom Cheap wholesaler

EPG is a skilled producer and exporter that is involved with the design, development and production. There is a specialized heart of province stage, EPG academician working station, experiment station for EPG post doctors, and nationwide 863 software set up in EPG team. With these platforms and powerful specialized potential, the much more than four hundred experts have created all selection of particular substantial precise and high energy goods, conducted mould plans for essential parts in the vehicle and nationwide business revitalizing program, ensuing far more than 5000 produced over, among which 33 objects are autonomous patent technologies with four patent approved . PersonnelOur revenue persons are well trained to accommodate your requests and talk English for your ease. Overview
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Fast Particulars
EPTing Arrangement: EPTcal Manufacturer Identify: EED
Input Velocity: 1400 rpm Output Velocity: four.eight rpm to 1075 rpm
Rated EPTT: .12 ~ 160KW EPT Ratio: 2.sixty four-251.twenty five
EPTT: EPTT/Silver or on ask for Origin: EPTT, EPTT (Mainland)
Warranty: one Calendar year Software: Business
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EPT Potential
EPT Ability: 20000 Piece/Parts for every Thirty day period
Further Provider: OEM is welcome
QC Method: ISO9001:2008
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EPTT amp Shipping and delivery
Package: EPTen box/Paper carton
Port: HangEPT/ZheJiang or on request
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

one. K series helical-EPTTl EPTT is the blend EPTT composition employing helical EPTs and spiral EPTTl EPTs,
a lot more massive EPTT torque and continual runnin greater effectiveness with rigEPTT angle Set up variety

2. Little vibration and low noise, with big EPTT ratio, the EPTT efficiency is greater

3. The material of EPTs is 20CrMnTi alloy metal and the hardness can achieve to EPTC58 deg ~ sixty two deg Right after tempering, ceme-
ntiting, quenching and many others. Heat treatment. All the EPTs are processed by accurate grinding and the precision can reach
to quality six~five.

four. Installation: Foot-mounted, flange, torque arm and so on Output sort: Solid shaft, hollow shaft and can choose to
include 1-essential, spline, or shrink disc relationship. Input Product: Straight related with motor, flange input or shaft enter.

About XiHu (West EPT) Dis.ngda since 1984
HangEPT Melchizedek EPTTort amp Export EPTT, Ltd. is a leaEPTTmanufactur in mechanism subject and punching/stamp
ing field because 1984. Our major product, NMRV worm EPT speed EPTT and sequence helical EPTT, XDR,
XDF, XDK, XDShave attained the EPTd technique index of the congeneric European and Janpanese produc
ts, We offer stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTs, sprockets, EPTs, pulleys, couplings, bushes and so on. We also can accept orders
of non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd products, this kind of as EPTs, shafts, punching areas ect, in accordance to customers' Drawings or sam-
ples.

Our business has complete established of equipment incXiHu (West EPT) Dis.Hu (West EPT) Dis. CNC, lathes, milling EPTTs, EPT hobbing EPTT, g-
ear grinding EPTT, EPT honing EPTT, EPT shaping EPTT, worm grinder, grinding EPTTs, drilling m-
achines, boringEPTTs, planer, drawing benches, punches, EPT presses, plate shearing EPTTs and s-
o on. We have EPTd tests equipments also.

Our organization has estabEPTTd favorable cooperation interactions with sub-suppliers involving casting, uncooked mat-
erial, warmth treatment method, floor finishing and so on.

in Austin United States sales price shop near me near me shop factory supplier Hollow Shaft Helical Worm Gearbox manufacturer best Cost Custom Cheap wholesaler

China manufacturer & factory supplier for VF in Port Harcourt Nigeria series worm gearbox small worm gearbox With high quality best price & service

With in excess of thirty many years of combined expertise in Bearings and Power Transmission, EPG is entirely able of developing and making products to in shape your certain software. Our experienced personnel of engineers and customer service associates look forward to delivering you with anyIf you are fascinated in any of our products or would like to examine a likely get, remember to feel free of charge to speak to us.

Overview

Fast Particulars

Relevant Industries:: Constructing Materials Shops, Production Plant, Equipment Restore Stores, Farms, Development works , Foodstuff & Beverage Outlets

Item name:: Worm Equipment Reducer

Shade:: Blue,Grey,Or Customized

Guarantee:: 1 Year

Application:: Meals ,Plastic, Convery, Machinery, Feed, Mining and so on

Certification:: ISO9001 , CE

Mounting Situation:: Horizontal (Shaft Mounted, Flange Mounted)

Packing:: Picket Box

Bearing:: C&U, NAK, NSK,SKF

OEM support:: Offered

Offer Potential

Offer Capacity:: one thousand Piece/Items for each Month

Packaging & Supply

EPG MachinerPTO shaft connectors on tractors are not standardized which can lead to difficulties when connecting the PTO shaft. For example, some more mature tractor types have the connection flange closer to the tractor alone generating it challenging to connect and guide to a potential security hazard.y is found in XiHu Location HangZhou Zhejiang ,China. It is 30km from our manufacturing unit to HangZhou worldwide airport.

Packaging Specifics: Plywood circumstance

Port: Ningbo,Shanghai

Direct Time :

Amount(Containers)	one - 10	>10
Est. Time(days)	fifteen	To be negotiated

On the web Customization

Attributes:
Substantial modular design and style, biomimetic surface with owned intellectual home appropriate.
Undertake German worm hob to approach the worm wheel.
With the specific gear geometry, it will get high torque, effectiveness and extended existence circle.
It can obtain the direct mix for two sets of gearbox.
Mounting method: foot mounted, flange mounted, torque arm mounted.
Output shaft: solid shaft, hollow shaft.

Designs:
Hollow Shaft Enter with IEC-normalized Motor Flange
VF030~VF105
Solid Shaft Enter
VF030~VF105

Attributes:
one. High quality aluminum alloy equipment box, gentle excess weight and not rust
2. 2 optional worm wheel supplies: Tin bronze or aluminum bronze alloy
3. Regular parts and really versatile for shaft configurations and motor flange interface
four. Numerous optional mounting options
5. Minimal sound, Substantial efficiency in heat dissipation

Ratio: 5, 7.5, 10, fifteen, twenty, twenty five, 30, forty, 50, sixty, 90, one hundred and five
Installation:
Flange Mounted
Foot Mounted
Torque Arm Mounted

Lubrication:
Grease Lubrication
Oil-bathtub and Splash Lubrication

Cooling:
All-natural Cooling

Q: Are you trading business or company ?
A: We At any time-Power Team one of the biggest transmission suppliers in the entire world are manufacturing facility.

Q: How extended is your shipping and delivery time?
A: Generally it is 5-10 days if the goods are in inventory. or it is 15-20 times if the products are not in stock.

Q: Can we purchase 1 pc of each merchandise for high quality screening?
A: Of course, we are happy to accept demo order for top quality testing.

Q: What is your conditions of payment ?
A: Payment=1000USD, thirty% T/T in advance, balance just before shippment.
If you have other concern, freely to speak to us,you should.

China manufacturer & factory supplier for VF in Port Harcourt Nigeria series worm gearbox small worm gearbox With high quality best price & service

Wpa Cheap made in China replacement parts in Bandung Indonesia Cast Iron Worm Speed Gearbox Gear Reducer with top quality

We - EPG Team the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Product Introduction:

WPA series reducer is a new-technology of goods created by our manufacturing unit on the foundation of introducing foreign sophisticated technology,its' main features are as follows:

1 Produced of higher good quality cast iron, mild excess weight and non-rusting
two Large output torque and higher radiating efficiency
three Clean running and lower noise
4 Very good-loo ept appearance, resilient provider daily life and tiny quantity
five Appropriate for omnibearing installation

Firm Profile

l The largest manufacturer and exporter of worm equipment reducers in Asia.

l Established in 1976, we transformed from a county owned manufacturing facility to non-public a single in 1996. HangZhou ept Power TRANSMISSION Tools CO.,LTD is our new name given that 2001.

l We are the 1st maker of reducers and gearboxes in China who was given export license because 12 months 1993.

l "Fixedstar" manufacturer gearboxes and reducers are the 1st proprietor of CHINA Prime Model and Most Famous Trade Mark for reducers.

First to achieve ISO9001 and CE Certification amongst all companies of gearboxes in China.

As a expert company of worm gearbox and worm gear reducers in China, we mostly create reduction gearbox,aluminum circumstance worm gearboxes,arc gear cylindrical worm gearboxes, worm equipment reducers, in line helical gearboxes, and cyclo drive reducers, etc. These goods function rational structure, secure functionality, and trustworthy top quality, and so on. They are extensively utilised in energy, mining, metallurgy, developing content, chemical, meals, printing, ceramic, paper-generating, tobacco, and other industries.

We have 600 workers in our factory, which handles 70,000 square meters in HangZhou. We have been ma ept 2,five hundred units of reducers each day because 2012. We are proudly exporting 70% of our goods to a lot more than forty nations all above the term. Our buyers occur from Italy, Germany, United states, Canada, Spain, Uk, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial nations around the world in the planet. thirty% of them are OEM created for direct makers of other merchandise.

We warmly welcome consumers from other areas of the entire world to check out us. Looking at is believing. We are extremely self-assured that soon after going to our facility, you will have self-confidence on our merchandise. We have the most current computerized equipments and knowledgeable personnel to make certain the secure top quality and large output. We have the most sophisticated technological and engineering team to support most demanding need on normal and OEM items.

Loo ept ept to assembly you in HangZhou, China.

The use of authentic gear manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the outlined alternative areas contained herein are not sponsored, approved, or created by the OEM.

Wpa Cheap made in China replacement parts in Bandung Indonesia Cast Iron Worm Speed Gearbox Gear Reducer with top quality

Worm national association of motor vehicle manufacturers Custom made in China - replacement parts - in Anyang Republic of Korea Gearbox Reducer Small Reduction Gearbox for Concrete Mixer with top quality

Worm national association of motor vehicle manufacturers Custom made in China - replacement parts - in Anyang Republic of Korea Gearbox Reducer Small Reduction Gearbox for Concrete Mixer with top quality

We - EPG Group the most significant worm gearbox, couplings and gears factory in China with 5 various branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Worm Gearbox gearbox small reduction gearbox for concrete mixer

Elements:

1. Housing: Die-forged Aluminium Alloy Gearbox (RV571~RV090)
Cast Iron Gearbox (RV110~RV150)
2. Worm Wheel: Wearable Tin Bronze Alloy, Aluminum Bronze Alloy
3. Worm Shaft: 20Cr Metal, carburizing, quenching, grinding, area hardness fifty six-62HRC, .3-.5mm remaining carburized layer following exact grinding
4. Enter Configurations:
Outfitted with Electric powered Motors (AC Motor, Brake Motor, DC Motor, Servo Motor)
IEC-normalized Motor Flange
Solid Shaft Enter
Worm Shaft Tail Extension Input
5. Output Configurations:
Keyed Hollow Shaft Output
Hollow Shaft with Output Flange
Plug-in Strong Shaft Output
six. Spare Areas: Worm Shaft Tail Extension, Single Output Shaft, Double Output Shaft, Output Flange, Torque Arm, Dust Protect
7. Gearbox Portray:
Aluminium Alloy Gearbox:
After Shot Blasting, Anticorrosion Remedy and Phosphating, Paint with the Color of RAL 5571 Gentian Blue or RAL 7035 Light Gray
Forged Iron Gearbox:
After Painting with Red Antirust Paint, Paint with the Shade of RAL 5571 Gentian Blue

Types:

Hollow Shaft Enter with IEC-normalized Motor Flange
RV571~RV150
Reliable Shaft Enter
RV571~RV150

Characteristics:

1. Top quality aluminum alloy gear box, mild weight and not rust
2. 2 optional worm wheel materials: Tin bronze or aluminum bronze alloy
three. Normal parts and very versatile for shaft configurations and motor flange interface
4. Many optional mounting possibilities
5. Lower noise, Large performance in warmth dissipation

Parameters:

Types	Rated Power	Rated Ratio	Input Hole Dia.	Input Shaft Dia.	Output Hole Dia.	Output Shaft Dia.	Center Distance
RV571	.06KW~.12KW	five~sixty	Φ9	Φ9	Φ11	Φ11	25mm
RV030	.06KW~.25KW	five~eighty	Φ9(Φ11)	Φ9	Φ14	Φ14	30mm
RV040	.09KW~.55KW	5~one hundred	Φ9(Φ11,Φ14)	Φ11	Φ18(Φ19)	Φ18	40mm
RV050	.12KW~1.5KW	5~100	Φ11(Φ14,Φ19)	Φ14	Φ25(Φ24)	Φ25	50mm
RV063	.18KW~2.2KW	seven.5~one hundred	Φ14(Φ19,Φ24)	Φ19	Φ25(Φ28)	Φ25	63mm
RV075	.25KW~4.0KW	7.5~a hundred	Φ14(Φ19,Φ24,Φ28)	Φ24	Φ28(Φ35)	Φ28	75mm
RV090	.37KW~4.0KW	seven.5~100	Φ19(Φ24,Φ28)	Φ24	Φ35(Φ38)	Φ35	90mm
RV110	.55KW~7.5KW	7.5~one hundred	Φ19(Φ24,Φ28,Φ38)	Φ28	Φ42	Φ42	110mm
RV130	.75KW~7.5KW	7.5~a hundred	Φ24(Φ28,Φ38)	Φ30	Φ45	Φ45	130mm
RV150	two.2KW~15KW	seven.5~a hundred	Φ28(Φ38,Φ42)	Φ35	Φ50	Φ50	150mm

Ratio: 5, 7.5, 10, fifteen, twenty, twenty five, 30, 40, fifty, 60, 80, one hundred

Installation:

Flange Mounted
Foot Mounted
Torque Arm Mounted

Lubrication:

Grease Lubrication
Oil-tub and Splash Lubrication

Cooling:

Organic Cooling

Pac ept & Supply:

Our business :
AOKMAN® was started in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare elements.
We can supply the appropriate resolution for uncountable applications. Our merchandise are commonly utilized in the ranges of metallurgical, metal, mining, pulp and paper, sugar and alcohol market place and numerous other sorts of devices with a strong presence in the international marketplace.
AOKMAN® has grow to be a reliable supplier, in a position to supply high good quality gearboxes.With 36 several years experience, we guarantee you the utmost dependability and safety for each merchandise and services.

Customer checking out:

FAQ:
one.Q:What varieties of gearbox can you make for us?
A:Main items of our firm: UDL collection pace variator,RV collection worm equipment gearbox, ATA sequence shaft mounted gearbox, X,B series gear gearbox,
P collection planetary gearbox and R, S, K, and F series helical-tooth gearbox, more
than one particular hundred models and thousands of specifications
two.Q:Can you make as for every customized drawing?
A: Indeed, we offer you tailored services for buyers.
three.Q:What is your terms of payment ?
A: thirty% ept payment by T/T soon after signing the contract.70% prior to shipping
four.Q:What is your MOQ?
A: 1 Set

If you have any demand from customers for our merchandise you should really feel totally free to contact me.

/ The use of authentic equipment manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, accredited, or manufactured by the OEM. /

Best China manufacturer & factory manufacturer in Thrissur India of New style fashion high precision helical gear worm gear reducer commutator good efficiency gearbox With high quality best price

Our producA power take-off or power takeoff (PTO) is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machine.ts are applied in many fields.

Overview

Quick Details

Applicable Industries:: Manufacturing Plant

Product name:: Gear reducer

Color:: Customer Requirement

Packing:: PLYWOOD

Certification:: ISO9001

Material:: Cast Iron

MOQ:: 1 PC

Output Form:: Flange Output

Warranty:: 12 Months

Mounting Position:: Horizontal (foot Mounted)

Supply Ability

Supply Ability:: 1111 Bag/Bags per Day

Packaging & Delivery

Packaging Details: PLYWOOD

Port: nb

Lead Time :

Quantity(Bags)	1 - 10	11 - 50	>50
Est. Time(days)	15	30	To be negotiated

Online Customization

manufacturer of New style fashion high precision helical gear worm gear reducer commutator good efficiency gearbox

Product Description

Product features

1. R series helical gearmotor own rational design, compact construction, smaller size than X or B series cycloidal gearmotor at the same permitted torque.

2. Little vibration and low noise, with high transmission efficiency.

3. The material of gears is 20CrMnTi alloy steel and the hardness can reach to HRC58°~ 62° after tempering,cementiting, quenching etc. heat treatment. All the gears are processed by accurate grinding and the precision can reach to grade 6~5.

4. The products have been mainly used in chemical machinery, cement agitator machinery, printing and packaging machinery, mine and power transmission machinery,metallurgy etc.

Application:R series reducer is a kind of gear is used to reduce the motor speed and improve the output torque of the principle of speed reducer. It uses the gear and gear meshing, with advanced design and novel structure of retarding mechanism.It has been widely used in metallurgy, mining, petroleum, chemical industry, ship, light industry, food, textile, printing and dyeing.

General Technical data
Housing material	HT250 high strength casting lron
Housing hardness	HBS190-240
Gear material	20CrMn Ti alloy steel
Surface hardness of gears	HRC58°~62°
Gear core hardness	HRC33~40
Input/output shaft material	40CrMo alloy steel
Input/output shaft hardness	HRC25In one way or another, all breathers let air flow between the inside and outside of the gear reducer as the unit warms during startup and cools after shutdown. If the breather is completely shielded from lubricant splash inside the reducer, almost any design will be effective. Unfortunately, this is usually not the case, particularly since most gear reducer housings can mount in a variety of positions. If the breather is exposed to oil splash, a bubble of oil typically forms across the breather's inside orifice, and escaping warm air carries it to the outside. Over time, these small droplets accumulate until the unit is visibly “leaking.”~30
Machining precision of gears	accurate grinding,6~7 Grade
Lubricant oil	GB L-CKC220-460,Shell Omala220-460
Heat treatment	Tempering,Cementiting,Quenching,etc
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp.rise (MAX)	40℃
Temp.rise (Oi) (MAX)	50℃
Vibration	≤20μm
Backlash	≤20Arcmin
Brand of bearings	China Top brand HRB,LYC,ZWZ or other brands requested,NSK.....
Brand of oil seal	NAK--- Taiwan or other brands requested

manufacturer of New style fashion high precision helical gear worm gear reducer commutator good efficiency gearbox

Nmrv kia auto manufacturer price made in China - replacement parts - in Surabaya Indonesia 075 Worm Gearbox Speed Reductor with Low Price Worm Gear Ratio 5 1 to 100 1 for Industrial Equipment with top quality

Nmrv kia auto manufacturer price made in China - replacement parts - in Surabaya Indonesia 075 Worm Gearbox Speed Reductor with Low Price Worm Gear Ratio 5 1 to a hundred 1 for Industrial Gear with prime quality

We - EPG Team the largest worm gearbox, couplings and gears factory in China with 5 distinct branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Merchandise Attributes
one. Mad of high-high quality aluminum alloy,mild excess weight and non-rusting
2. Huge output torque
3. Easy in running and lower in sound,can perform lengthy time in dreadful situations.
4. Substantial in radiating efficiency.
five. Very good-loo ept in look,sturdy in provider life and little in quantity.
six. Suitable for omnibearing set up.

type:	Worm Gear Speed Reducer/ Gearbox
Model No.:	NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
Ratio:	five,7.5,ten,15,twenty,twenty five,thirty,40,50,60,80,100
Colour:	Blue(Ral5571)/Silver Gray (RAL9006) Or On Client Request
Material:	Housing: Dimensions 25-a hundred and ten Is Aluminum Alloy, Size one hundred ten-one hundred fifty Is Cast-Iron
	Worm Wheel: ZCuSn10Pb1
	Worm:20Cr
	Pinion:Tin Bronze
	Output Shaft: Metal-45#
Usages:	Industrial Equipment: Foodstuff Stuff, Ceramics, Chemical, Packing, Dyeing,Wood operating, Glass.
IEC Flange:	IEC Common Flange Or On Customer Ask for

: Are you ept firm or manufacturer ?

A: We are manufacturing unit.

Q: How long is your delivery time?

A: Normally it is 5-10 times if the merchandise are in inventory. or it is fifteen-twenty days if the goods are not in stock, it is according to quantity.

Q: Do you give samples ? is it cost-free or added ?

A: Yes, we could provide the sample for totally free demand but do not shell out the value of freight.

Q: What is your phrases of payment ?

A: Payment=1000USD, thirty% T/T in ept ,harmony ahead of shippment.
If you have another concern, pls feel free of charge to speak to us as underneath:

/ The use of unique products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the listed substitution components contained herein are not sponsored, approved, or produced by the OEM. /

Drive delta connection for motor Custom made in China - replacement parts - in Akure Nigeria Gearbox Nmrv Series Worm Gear Reducer with top quality

We - EPG Group the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 different branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Technical knowledge list:

Sort:	Worm Equipment Pace Reducer
Model:	NMRV571--a hundred and fifty
Ratio:	one:7.5,10,15,twenty,25,30,forty,fifty,sixty,80,a hundred
Shade:	Blue/Silver Or On Consumer Ask for
Materials	Housing: Blue-Colored Forged-Iron Worm Gear-Copper-ten-3# Worm-20CrMn Ti with carburizing and quenching, surface area harness is fifty six-62HRC Shaft-chromium metal-45#
Lubricant:	Synthetic&Mineral
Bearing:	C&U Bearing
Seal:	NAK SKF
Guarantee:	-30-40°C
ICE FLANGE	80B5,90B5,100B5,112B5,132B5,160B5
Rated electrical power:	.06KW,.12KW,.25KW,.75KW,1.5KW,3KW,5.5KW,7.5KW
Software	Metallurgical machinery, food machinery, phase machinery, welding equipment, highway equipment, amusement machines, packaging equipment, Rubber and plastic machinery, environmental defense equipment ,engineering equipment, development equipment, equipment instrument business, automotive industry, logistics and transportation and so on

NMRV	PAM	N	M	P	D
	ICE				five	seven.5	10	fifteen	twenty	twenty five	30	40	50	60	eighty	a hundred
25	56B14	50	65	80	9	nine	nine	9	9		9	nine	nine	9
30	63B5	ninety five	a hundred and fifteen	a hundred and forty	11	11	eleven	eleven	eleven	eleven	eleven	11	eleven
	63B14	60	75	90
	56B5	eighty	100	120	9	9	9	9	9	9	nine	nine	nine	nine	9
	56B14	fifty	65	eighty
40	71B5	a hundred and ten	a hundred thirty	one hundred sixty	14	fourteen	14	14	fourteen	fourteen	14	14
	71B14	70	85	105
	63B5	95	115	a hundred and forty	11	11	11	11	11	11	eleven	eleven	eleven	11	eleven	eleven
	63B14	sixty	75	90
	56B5	80	a hundred	one hundred twenty									nine	nine	9	nine
50	80B5	one hundred thirty	one hundred sixty five	two hundred	19	19	19	19	19	19	19
	80B14	eighty	one hundred	a hundred and twenty
	71B5	a hundred and ten	130	a hundred and sixty	14	14	fourteen	14	fourteen	14	14	fourteen	fourteen	14	fourteen
	71B14	70	eighty five	105
	63B5	ninety five	a hundred and fifteen	a hundred and forty								eleven	eleven	eleven	eleven	eleven
63	90B5	one hundred thirty	a hundred sixty five	two hundred		24	24	24	24	24	24
	90B14	95	a hundred and fifteen	one hundred forty
	80B5	130	165	200		19	19	19	19	19	19	19	19	19
	80B14	80	100	120
	71B5	a hundred and ten	130	a hundred and sixty								14	14	fourteen	fourteen	14
	71B14	70	85	one hundred and five
75	a hundred/112B5	one hundred eighty	215	250		28	28	28
	100/112B14	one hundred ten	one hundred thirty	one hundred fifty
	90B5	a hundred thirty	165	two hundred		24	24	24	24	24	24	24
	90B14	95	one hundred fifteen	one hundred forty
	80B5	130	a hundred sixty five	two hundred					19	19	19	19	19	19	19	19
	80B14	eighty	a hundred	one hundred twenty
	71B5	110	130	one hundred sixty									fourteen	14	14	fourteen
90	one hundred/112B5	a hundred ninety	215	250		28	28	28	28	28	28
	100/112B14	110	one hundred thirty	one hundred sixty
	90B5	one hundred thirty	a hundred sixty five	two hundred		24	24	24	24	24	24	24	24	24
	90B14	ninety five	one hundred fifteen	a hundred and forty
	80B5	a hundred thirty	165	two hundred								19	19	19	19	19
	80B14	eighty	one hundred	one hundred twenty
110	132B5	230	265	three hundred		38	38	38	38
	100/112B5	180	215	250		28	28	28	28	28	28	28	28	28
	90B5	one hundred thirty	a hundred sixty five	200						24	24	24	24	24	24	24
	80B5	a hundred thirty	165	200											19	19
130	132B5	230	265	300		38	38	38	38	38	38	38
	one hundred/112B5	180	215	250						28	28	28	28	28	28	28
	90B5	one hundred thirty	a hundred sixty five	two hundred											24	24
150	160B5	250	three hundred	350		42	42	42	42	forty two
	132B5	230	265	250					38	38	38	38	38	38
	one hundred/112B5	180	215	two hundred									28	28	28	28

Factors:

one. Housing: Die-cast Aluminum Alloy Gearbox (RV571~RV090)
Cast Iron Gearbox (RV110~RV150)
two. Worm Wheel: Wearable Tin Bronze Alloy, Aluminum Bronze Alloy
three. Worm Shaft: 20Cr Metal, carburizing, quenching, grinding, surface hardness fifty six-62HRC, .3-.5mm remaining carburized layer after precise grinding
four. Enter Configurations:
Equipped with Electric powered Motors (AC Motor, Brake Motor, DC Motor, Servo Motor)
IEC-normalized Motor Flange
Reliable Shaft Enter
Worm Shaft Tail Extension Input

five. Output Configurations: Keyed Hollow Shaft Output
Hollow Shaft with Output Flange
Plug-in Solid Shaft Output
six. Spare Parts: Worm Shaft Tail Extension, One Output Shaft, Double Output Shaft, Output Flange, Torque Arm, Dust Cover
seven. Gearbox Painting:
Aluminum Alloy Gearbox:
Right after Shot Blasting, Anticorrosion Remedy and Phosphating, Paint with the Coloration of RAL 5571 Gentian Blue or RAL 7035 Mild Grey
Cast Iron Gearbox:
Following Painting with Red Antirust Paint, Paint with the Shade of RAL 5571 Gentian Blue

Workshop present

FAQ

Q1. What is your phrases of packing?
A: Generally, we pack our items in single coloration box. If you have particular ask for about packing, pls negotiate with us in advance, we can pack the products as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% prior to supply. We'll show you the photographs of the merchandise and packages
just before you spend the harmony. Other payments phrases, pls negotiate with us in progress, we can talk about.

Q3. What is your conditions of shipping?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will just take twenty five to 30 times following receiving your ept payment. The distinct delivery time depends
on the items and the quantity of your order.

Q5. Can you generate in accordance to the samples?
A: Sure, we can generate by your samples or complex drawings. We can develop the molds and fixtures.

Q6. What is your sample plan?
A: We can offer the sample if we have ready areas in stock, but the clients have to pay the sample price and
the courier price.We welcome sample order.

Q7. Do you check all your items ahead of delivery?
A: Indeed, we have a hundred% test ahead of shipping and delivery

Q8: How do you make our enterprise long-term and excellent partnership?
1. We keep excellent quality and competitive price to make sure our clients benefit
2. We regard every buyer as our good friend and we sincerely do business and make buddies with them,
no issue exactly where they arrive from.

/ The use of first tools manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the detailed substitute parts contained herein are not sponsored, approved, or made by the OEM. /

Drive delta connection for motor Custom made in China - replacement parts - in Akure Nigeria Gearbox Nmrv Series Worm Gear Reducer with top quality