Tag Archives: Screw air compressor

Manufacturer Custom made in China - replacement parts - in Karachi Pakistan Supplier Industrial Double Stage Screw Air Compressor with top quality

Manufacturer  Custom  made in China - replacement parts -  in Karachi Pakistan  Supplier Industrial Double Stage Screw Air Compressor with top quality

We - EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Introduction of double phase screw air compressor 
Double phase screw air compressor in the principal elements with double screw,the compression procedure by the fir EPT phase screw and second screw through grading collection compression.
Double screw air compressor in addition to uphold twin-screw compressor has the positive aspects of basic structure,adaptable set up and substantial effectiveness,but also highlights the advantages of their personal effective,strength-conserving:
1.can decrease the bearing load,increase volume effectiveness,
2.in the situation of some load operation,can improve efficlency,power saving.
Double screw air compressor than twin-screw compressor vitality saving up to fifteen%,every run for 8000 hrs a 12 months, Yearly personal savings of about two hundred thousand yuan electrical energy.
Edge of two phase screw air compressor 
one. Hierarchical compression to preserve compression operate
Through the two-phase series process, the unique single-stage compression process is divided into two compression processes. These kinds of a method environment can lessen the ratio of each one-phase compression method, which can effectively reduce the compression and compression of every single stage screw. Required travel power.
In the process of ideal fuel compression, the sum of the power required for single-phase strain transmission and the energy needed for multi-phase compression is equivalent, but in the real compression procedure, owing to a series of variables such as the transmission electricity decline of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the boost of the used drive, the ineffective energy exceeding the same ratio is produced, so the worthless electrical power in the actual compression method can be reduced by reducing the compression ratio of every stage, so that the sum of the power required for multi-stage compression is less than that of solitary-phase compression Required electricity.
two. The intermediate warm oil coo EPT and reduces the temperature of the gas getting into the up coming stage. All the fuel compression approach is really the method of the friction among the gas and the moving areas and currently being compressed by it.
In the existence of friction, the gasoline will increase in temperature because of to friction, and there will inevitably be a trend of shadow accounts. This portion of vitality will be unveiled in the form of drive in the fixed quantity of air compression by growing its own stress.
The temperature increase of the gasoline raises the pressure of the gasoline by itself during the compression procedure and will increase the compression ratio. For that reason, it is required to spend added electrical power to drive the tools to shrink the air to the wanted pressure worth. For that reason, the two-phase screw compressor is supplied with a coolant injection curtain gadget.

 


 


Q1: What is the rotor velocity for the air end?
A1: 2980rmp.

Q2: What's your lead time?
A2: usually, 5-7 days. ( EPT orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (generally, air cooled kind).

This autumn: What's the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the entire air compressor(not which includes the usage spare components) and technical supports can be offered in accordance to your demands.

Q7: Can you acknowledge EPT orders?
A7: Of course,  EPT orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

We - EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic gear manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the listed alternative elements contained herein are not sponsored, accepted, or produced by the OEM.

Manufacturer  Custom  made in China - replacement parts -  in Karachi Pakistan  Supplier Industrial Double Stage Screw Air Compressor with top quality

Manufacturer  Custom  made in China - replacement parts -  in Karachi Pakistan  Supplier Industrial Double Stage Screw Air Compressor with top quality

Manufacturer  Custom  made in China - replacement parts -  in Karachi Pakistan  Supplier Industrial Double Stage Screw Air Compressor with top quality

SCR10m shop made in China - replacement parts - in Perm Russian Federation New Japanese Technology Screw Air Compressor with High Efficiency Airend with top quality

SCR10m  shop  made in China - replacement parts -  in Perm Russian Federation  New Japanese Technology Screw Air Compressor with High Efficiency Airend with top quality

We - EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Merchandise Technological Description
 

Design :  Oil Injected Screw Air Compressor Belt Driven (M sequence)
Variety:  Oil Injected Belt Driven Screw Air Compressor
Voltage:  380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Specifications
Operating Stress:  7~twelve.5 bar
Installed Motor Electrical power:  4KW~75KW
Capability: .58~thirteen.3m3/min
Shade:  Blue
Pushed Approach: Belt Driven
Air Conclude: EPT Ally-win Air End from Germany
Trademark:  SCR
Transport Deal:  Normal Picket Packing
Obtainable Certification:  CE, ISO, UL, ASME, GHOST
Origin:  ZheJiang , China
application:  Casting , Steel , Plastic , Rubber

Product Characteristics

1. Sino-Japan technologies cooperation, substantial trustworthiness.

2. Huge airend with reduced rpm for far better overall performance an extended daily life span.

three. Higher trustworthiness factors imported authentic from Germany, Swiss and many others.

4. CE degree security style and manufacturing

5. Oversize cooler ideal for tropical region.

six. A lot more than ten,000.00 models operating around the globe given that 10years in the past.

seven. In tel: +86~13 0571 88828ligent P EPT handle.

8. Easy to do routine maintenance and services.

one.Automatic interlock management and operations management

In tel: +86~thirteen 0571 88828ligent microcomputer controller, mixed with pressure, temperature, recent, signal, alarm with 12 crucial indicators and thirteen comprehensive security safety actions with Chinese and English exhibit optional and maintenance time limit remind. The RS485 conversation interface can understand many equipment joint manage. Concise and complete to keep the buyer knowledgeable of the machines' scenario in time.

2.Secure and zero leakage relationship

S EPT have abandoned the traditional minimal co EPT hydraulic hose design. S EPT use Higher-rigid pipes and adaptable joint relationship, steering clear of bursts generally induced by ageing . Fluorine rubber sort -ring offers a adaptable seal preventing leakage.

3.weighty responsibility air filter with prefilter

A European imported air filter provides Substantial performance and a reduced stress fall.

four.Siemens model electrical factors

five.American model large performance transmission program


 

Model SCR10M-8 SCR10M-ten SCR10M-twelve.5
Capacity/Force(m3/min,/BAR) one.01/eight .ninety seven/ten .88/twelve.five
TEFC Motor Power(KW) 7.5KW(10H.P)
Velocity(r/min) 2910
Starting way Star-Delta
Volt(V) 380/400/415(220)
Motor safety grade IP54
Motor isolation grade F
Electrical Supply 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC) ≤ Environment Temperature+10ºC
Driven way Belt Driven
Noise level at 1 meter 68±3dB(A)
Cooling method Air cooling
Oil content ≤3 ppm
Outlet Connection Rc 1/2"
Dimension Duration(mm) 900
Width(mm) 680
Peak(mm) 970
Weight(KG) 250

Product Categories

Positive aspects

Application

About SCR

 

We - EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the detailed alternative parts contained herein are not sponsored, accredited, or created by the OEM.

SCR10m  shop  made in China - replacement parts -  in Perm Russian Federation  New Japanese Technology Screw Air Compressor with High Efficiency Airend with top quality

SCR10m  shop  made in China - replacement parts -  in Perm Russian Federation  New Japanese Technology Screw Air Compressor with High Efficiency Airend with top quality

SCR10m  shop  made in China - replacement parts -  in Perm Russian Federation  New Japanese Technology Screw Air Compressor with High Efficiency Airend with top quality